TECHNICAL CHARACTERISTICS 5,0 SPECIFICATION 2,0 >Rating: 50mA, 12VDC LED (-) 4 6 >Contact Resistance: Initial: 100mOHM max. 3 5 After Life Test: 100mOHM max. detail A detail B 1 >Insulation Resistance: min. 100MOHM at 500VDC 2 >Dielectric Strength: 250VAC for 1 minute 1 2 >Stroke: 0.25 +0.2/-0.1 mm >Bounce: 10ms max. MATERIAL 5 4 3 6 LED (+) 1,5 >Cover: LCP UL 94V-0 8,0 >Actuator: LCP UL 94V-0 9,3 >Frame: LCP UL 94V-0, color white >Contact: Stainless Steel with Ag Pattern Dimensions >Terminal: Brass with Ag 6,8 2,3 >Tape: Polyimide 1,2 Stem SOLDERING INFORMATION >Terminal in SMD version Switch >According to JEDEC J-STD 020 Hot Air, 2 times max. B >Hand soldering under 350C for 3 sec. max 1 2 ENVIRONMENTAL A >Storage condition: -40C ~ +85C, 60% RH max. Circuit Diagram >Operation condition: -40C ~ +85C >MLS Level: 3 >Compliance: ROHS, Reach 3,25 HANDLING ADVISE >ESD prevention methods need to be applicated for manual handling and processing by machinery >Resistors for protection are obligator LED SCHEMATIC PACKAGING INFORMATION >Reel in ESD bag PN Force Color of LED Life cycle Scale - 5:1 44 4RD2 1025 816 160g +75/-30gf Red / Red 50.000 44 4VD2 1025 816 160g +75/-30gf Bright green / Bright green 50.000 44 4BD2 1025 816 160g +75/-30gf Blue / Blue 50.000 44 4YD2 1025 816 160g +75/-30gf Yellow / Yellow 50.000 GENERAL TOLERANCE Basic material Projection .x = +/- 0,2 This electronic component is designed and developed with the intention for use in general electronics equipmentsxx = +/- 0,15 Before incorporating the components into any equipments in the field such as Date Name DESCRIPTION aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, 12-10-09 Jelisarow SwTASL Drawn medical, public information network etc. where higher safety and reliability are Checked 12-10-09 Hsu WS-TASL 6,8*4,5mm Tact Switch with integrated LED, SMD especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. version In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or Position WE Scale 5:1 SIZE Wrth Elektronik performance, the sufficient reliability evaluation-check for the safety must be revised MatchCode 14-09-26 DaF b eiCan performed before by the user before usage. eiCan CAD 444xx21025816 Drawing.- No. A4 a Bounce 10ms max. 14-04-14 DaF 444x21025816.dft REV FILE DATE BY EDV NO System :Solid Edge ST4 1,7 0,5 4,5 2,5 2,0 +0,05 0 - 0,1 +0,05 0 - 0,1 5,4 3,4 1,4Emitting color Yellow Red bright green green Blue HANDLING ADVISE Order code YS RS VS GS BS item unit 1) The solder profile has to be complied with according to the technical 1 Peak wavelength typ. nm 590 650 574 520 468 reflow /or wave soldering specification, otherwise no warranty will be Dominant Wave length sustained IF=20mA 2 typ.nm 590 630 567 525 470 2) All products are supposed to be used before the end of the period of spectral Line Half-width 12 months based on the product date-code, if not 100% solderability 3 IF=20mA typ.nm 20 28 20 35 21 can t be warranted Capacitance VF=0V f=1MHZ 4 typ.pF 20 35 15 100 100 3) Violation of the technical product specifications such as exceeding Forward voltage typ. V 2 1,95 2,1 3,2 3,2 the absolute maximum ratings will be result in the loss of warranty 5 IF=20mA max.V 2,5 2,5 2,5 4 4 Reverse current 4) It s also recommended to return the products into the original 6 VR=5V uA 10 10 10 10 10 packaging 7 ESD V 2000 2000 2000 1000 1000 8 Viewing Angle 5) ESD prevention methods need to be applicated for manual handling 20mA 2 50% typ 145 145 145 145 145 and processing by machinery Luminous intensity min. mcd 80 120 20 80 20 9 IF=20mA typ. mcd 180 220 50 150 50 6) Resistors for protection are obligatory 10 Material AIGaInP AIGaInP AIGaInP InGaN InGaN 11 lens type water clear water clear water clear water clear water clear 7) The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet.On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and Absolute Maximun Ratings (Ambient Temperature 25C ) forward voltage.In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered.Please Properties Blue & green Red yellow bright green Unit contact us in advance, if you need a particular bin sorting before Power Dissipation 120 75 75 75 mW placing your order to clarify the lead time, MOQ and pricing. Peak Forward current 100 185 175 150 mA continuous Forward current 30 30 30 30 mA Reverse voltage 5 5 5 5 V ESD Threshold / HBM 1000 2000 2000 2000 V GENERAL TOLERANCE Basic material Projection .x = +/- 0,2 This electronic component is designed and developed with the intention for use in general electronics equipmentsxx = +/- 0,15 Before incorporating the components into any equipments in the field such as Date Name DESCRIPTION aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, 12-10-09 Jelisarow SwTASL Drawn medical, public information network etc. where higher safety and reliability are Checked 12-10-09 Hsu WS-TASL 6,8*4,5mm Tact Switch with integrated LED, SMD especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. version In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or Position WE Scale 5:1 SIZE Wrth Elektronik performance, the sufficient reliability evaluation-check for the safety must be revised MatchCode 14-09-26 DaF b eiCan performed before by the user before usage. eiCan CAD 444xx21025816 Drawing.- No. A4 a Bounce 10ms max. 14-04-14 DaF 444x21025816.dft REV FILE DATE BY EDV NO System :Solid Edge ST4