471005264152 Wurth

O 1,6 0,2 Dimensions: mm Recommended Hole Pattern: mm 13,6 L 31,5 9,8 0,3 Schematic: 0,8 0,03 6,3 0,1 9,3 0,5 12,2 0,3 2 1 Scale - 1:1 For detailed Marking description please see page 2 Component Marking. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD ICh 002.000 2021-04-30 DIN ISO 2768-1m Panel cutout: mm L (mm) Panel Thickness (mm) DESCRIPTION WS-RSTV 27.6 x 13.8 mm Panel 27.6 1.00 - 3.00 Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE 27.8 3.00 - 4.00 Cut-out with 0.25 Quick connect EMC & Inductive Solutions Max-Eyth-Str. 1 471005264152 28.0 4.00 - 5.00 74638 Waldenburg terminal Rocker Switch Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 31.5 x 18.5 mm eiCan Valid 1/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 18,5 0,3 10,0 0,5 1,6 0,2 30,9 0,1 6,3 0,1 +0,1 13,8Component Marking: Material Properties: Marking 1 Marking 2 Terminal Plating Silver 1st line WE RSTV 1st line WE RSTV Electrical Properties: 2nd line 16(4)A 250V~T85 2nd line 16A 12VDC~T85 Properties Test conditions Value Unit Tol. 3rd line UL , ENEC, CQC 3rd line 10A 28VDC~T85 Rated Current Resistive Load I 250 V (AC) 16 A 4th line UL , ENEC, CQC R I Rated Current Motor Load 250 V (AC) 4 A R Dimensions: Inrush Current Motor Load 250 V (AC) 24 A I Properties Value Unit Rated Current Resistive Load 12 V (DC) 16 A R I Tab Thickness 0.8 mm Rated Current Resistive Load 28 V (DC) 10 A R Tab Width 6.3 mm Contact Resistance R 50 m max. R Tab Hole Diameter 1.6 mm Insulation Resistance 500 V (DC) 100 M min. ISO General Information According to IEC61210: 0.25 Withstanding Voltage Pin to Pin 1 min 1500 V (AC) Withstanding Voltage Pin to 1 min 3000 V (AC) Material Properties: Frame Actuator Material PA66 Mechanical Properties: Actuator Flammability Rating UL94 V-2 Actuator Color Black Properties Value Unit Tol. Frame Material PA66 Force (OFF to ON) 650 g 300g Frame Flammability Rating UL94 V-2 Electrical Life 10000 Cycles Frame Color Black Schematic SPST Spring Material Carbon Steel General Information: Spring Holder Material Copper Alloy Operating Temperature 0 up to +85 C Moveable Contactor Material Copper Alloy Moveable Contactor Plating Silver Storage Conditions (in original < 40 C < 75 % RH packaging) Moveable Contact Material Copper Alloy Moisture Sensitivity Level (MSL) 1 Moveable Contact Plating Silver Ingress Protection Code None Stationary Contact Material Copper Alloy Stationary Contact Plating Silver Terminal Material Copper Alloy CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD ICh 002.000 2021-04-30 DIN ISO 2768-1m DESCRIPTION WS-RSTV 27.6 x 13.8 mm Panel Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE Cut-out with 0.25 Quick connect EMC & Inductive Solutions Max-Eyth-Str. 1 471005264152 74638 Waldenburg terminal Rocker Switch Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 31.5 x 18.5 mm eiCan Valid 2/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.