64406106111000 Wurth

Dimensions: mm 16,8 Connector 1 Connector 2 Scale - 9:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JaC 001.000 2019-03-13 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64406106111000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com MCX Jack to MCX Jack eiCan Valid 1/4 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 6,5Material Properties: Contact Resistance After Test 4) R DC 0.2 V / 1 A 7.5 m max. Withstanding Voltage 500 V (AC) in 60 sec. 750 V (RMS) min. Insulator Material PTFE Insulator Color White Working Voltage 5) 335 V (RMS) max. Center Contact Material Beryllium Copper 1) Center Contact 2) Center Contact Center Contact Plating Gold, min. 0.76m over Nickel 3) Outer Contact 4) Outer Contact Body Material Brass 5) At sea level Body Plating Gold, min. 0.076m over Nickel Mechanical Properties: Kind Properties: Properties Value Unit Tol. Properties Value Center Contact Retention (Axial) 10 N min. Interface 1 IO IEC 61169-36 Mating Cycle 500 Cycles 1 Connector Type 1 MCX Force to Engage 63 N max. Gender 1 Jack Force to Disengage 8 - 20 N Interface 2 IO IEC 61169-36 2 Connector Type 2 MCX Packaging Properties: Gender 2 Jack Properties Value Packaging Bag General Information: Packaging Unit Qty. 50 Operating Temperature -55 up to +155 C Electrical Properties: Properties Test conditions Value Unit Tol. Impedance Z DC~6 GHz 50 Frequency Range f DC~6 GHz VSWR DC~6 GHz 1.3 max. Insertion Loss IL DC~6 GHz 0.25 dB max. Insulation Resistance R 500 V (DC) in 120 sec. 1000 M min. ISO Contact Resistance Initial 1) R DC 0.2 V / 1 A 5 m max. Contact Resistance After Test 2) R DC 0.2 V / 1 A 15 m max. Contact Resistance Initial 3) R DC 0.2 V / 1 A 2.5 m max. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JaC 001.000 2019-03-13 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64406106111000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com MCX Jack to MCX Jack eiCan Valid 2/4 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.