65503503230508 Wurth

O 6,5 0,05 O 10,2 Dimensions: mm Recommended Panel Cutout: mm L 11,4 5.8 A/F Connector 1 Connector 2 2 CREATED CHECKED GENERAL TOLERANCE PROJECTION Article Properties: Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Properties Value Unit Tol. Max-Eyth-Str. 1 DESCRIPTION Nominal Cable Length L 304.8 mm 74638 Waldenburg Germany SMA Straight Plug to SMA Straight Panel Thickness 2.8 mm max. Tel. +49 (0) 79 42 945 - 0 ORDER CODE Bulkhead Jack on Hand-Formable www.we-online.com 65503503230508 Cable .085 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 6,5 6 0,05Material Properties Cable: Nut Material Brass Nut Plating Gold, min. 0.076m over Nickel Properties Value Unit Cable .085 Lock Washer Material Brass Lock Washer Plating Gold, min. 0.076m over Nickel Nominal Outer Cable Diameter 2.15 mm Material Properties Connector 1: Kind Properties: Interface MIL-STD-348 Insulator Material PTFE Cable Type Hand-Formable Insulator Color White Cable Shielding Tin-soaked Center Contact Material Beryllium Copper Connector Type 1 SMA Center Contact Plating Gold, min. 0.76m over Nickel Gender 1 Plug Body Material Brass Orientation Type 1 Straight Body Plating Gold, min. 0.076m over Nickel Connector Type 2 SMA Coupling Nut Material Brass Gender 2 Jack Coupling Nut Plating Gold, min. 0.076m over Nickel Orientation Type 2 Straight Retention Ring (C Ring) Material Stainless Steel Retention Ring (C Ring) Plating Passivated General Information: Gasket Material Silicone Operating Temperature -65 C up to +165 C Gasket Color Red Compliance RoHS Heat Shrink Tube Material PE Heat Shrink Tube Color Black Electrical Properties: Properties Test conditions Value Unit Tol. Material Properties Connector 2: Impedance DC~18 GHz Z 50 Insulator Material PTFE Frequency Range f DC~18 GHz Insulator Color White VSWR DC~18 GHz 1.5 max. Center Contact Material Beryllium Copper Insertion Loss DC~18 GHz IL 1.4 dB max. Center Contact Plating Gold, min. 0.76m over Nickel Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min. Body Material Brass ISO Withstanding Voltage 500 V (AC) in 60 sec. 750 V (RMS) min. Body Plating Gold, min. 0.076m over Nickel Working Voltage 250 V (RMS) min. Heat Shrink Tube Material PE Heat Shrink Tube Color Black CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany SMA Straight Plug to SMA Straight Tel. +49 (0) 79 42 945 - 0 ORDER CODE Bulkhead Jack on Hand-Formable www.we-online.com 65503503230508 Cable .085 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.