Dimensions: mm Recommended Hole Pattern: mm 1 End pl 0.15 7,62 0.1 3,81 0.1 7,62 0.1 1 x 0,8 0,6 0.3 L 0.15 1 End Pl 0.15 4,6 0.3 Pattern Properties: Properties Value Unit Pin to Pin (Middle) p 15.24 mm l CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION Article Properties: METHOD JHe 002.000 2020-03-16 DIN ISO 2768-1m Properties Value Unit DESCRIPTION Pins 3 WR-TBL Series 2184 - 7.62 mm Pin to Pin (Middle) P 15.24 mm Wrth Elektronik eiSos GmbH & Co. KG l ORDER CODE EMC & Inductive Solutions Length L 22.86 mm Max-Eyth-Str. 1 691218410003 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Horizontal Entry Modular with Rising Cage Clamp eiCan Valid 1/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 1,6 0.1 12,5 0.3 4,2 0.3 21,5 0.3Kind Properties: Wire Properties: Properties Value Unit Solid Wire Section (AWG) 10 to 24 (AWG) Pitch P 7.62 mm Solid Wire Section (Metric) 5.26 to 0.205 (mm) Stranded Wire Section (AWG) 10 to 24 (AWG) Material Properties: Stranded Wire Section (Metric) 5.26 to 0.205 (mm) Insulator Material PA66 Certification: Insulator Flammability Rating UL94 V-0 Insulator Color Green RoHS Approval Compliant 2011/65/EU&2015/863 Contact Material Copper REACh Approval Conform or declared (EC)1907/2006 Contact Plating Tin over Nickel Halogen Free Conform IEC 61249-2-21 Cage Material Brass Halogen Free Conform JEDEC JS709B Terminal Screw Material Steel cULus Approval E315414 Terminal Screw Plating Zinc General Information: Operating Temperature -40 up to +105 C Electrical Properties: Properties Value Unit Tol. Rated Current I 30 A R Working Voltage 300 V (AC) Withstanding Voltage 1600 V (AC) Contact Resistance R 20 m max. Mechanical Properties: Properties Value Unit Tightening Torque 0.5 N*m Wire Strip Length 6 up to 7 (mm) Screw M3.5 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JHe 002.000 2020-03-16 DIN ISO 2768-1m DESCRIPTION WR-TBL Series 2184 - 7.62 mm Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 691218410003 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Horizontal Entry Modular with Rising Cage Clamp eiCan Valid 2/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.