Dimensions: mm Electrical Properties: Properties Value Unit Volume Resistance R 0.009 V A O 3,2 typ 100,0 5,0 detail A General Information: Flammability: No flame, no glowing. IEC 60695-2-11. Test severity 750C 6,7 0,5 Scale - 1:3 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JoV 004.000 2016-12-30 DIN ISO 2768-1m DESCRIPTION Earthing Belt Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 74273702 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com M3 eiSos Valid 1/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 1,6 0,3 7,5 4,0 0,4 The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is Cautions and Warnings: lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. The following conditions apply to all goods within the product series of WE-EEL ofWrth Handling: Elektronik eiSos GmbH & Co. KG: Use a M4 screw to mount the Earthing Metal Clip to the PCB. The Earthing Metal Clip shall not exceed the recommended clamping torque. If the recommended clamping torque is exceeded, there is General: a risk that the Clip will not be able to push back into the initial state. Do not bend the Metal Clip to the opposite position, as the material will overstretch and possibly break. This electronic component is designed and manufactured for use in general electronic equipment. Avoid connecting, touching, or overlapping the contact between the cable and PCB with any non-conductive coating. Wrth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any Please be aware that products provided in bulk packaging may get bent and might lead to derivations from the mechanical equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect. ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient especially required and/or if there is the possibility of direct damage or human injury. temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. temperature specified. The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. Do not drop or impact the components, the component may be damaged However, no responsibility is assumed for inaccuracies or incompleteness. Wrth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Wrth Elektronik does not warrant any customer qualified product characteristics beyond Wrth Elektroniks specifications, for its validity and sustainability over time. The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products. Product specific: Cleaning and Washing: Washing agents used during the production to clean the customer application might damage or change the characteristics of the component, marking or scratch the material. Washing agents may have a negative effect on the long-term functionality of the product. Storage Conditions: A storage of Wrth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad mounting. Therefore, all products shall be used within the period of 12 months based on the day of shipment. Do not expose the components to direct sunlight. The storage conditions in the original packaging are defined according to DIN EN 61760-2. The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Packaging: CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JoV 004.000 2016-12-30 DIN ISO 2768-1m DESCRIPTION Earthing Belt Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 74273702 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com M3 eiSos Valid 2/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.