Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 1 MHz/ 10 mA 0.47 H 20% Rated Current I T = 40 K 4.5 A max. R Saturation Current I L/L < 30 % 15.5 A typ. SAT DC Resistance R 20 C 18 m typ. DC DC Resistance R 20 C 22 m max. DC Peak Voltage V 25 V max. P Self Resonant Frequency f 89 MHz typ. res 0,95 0,2 4,0 0,2 Certification: 1,9 1,2 RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 3,7 0,2 Scale - 7:1 Halogen Free Conform JEDEC JS709B Halogen Free Conform IEC 61249-2-21 Schematic: General Information: It is recommended that the temperature of the component does not exceed +125 C under worst case conditions Ambient Temperature (referring -40 up to +85 C to I ) R Operating Temperature -40 up to +125 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Scale - 7:1 Product Marking: Start of Winding CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking R47 (Inductance Code) ChriB 001.001 2019-11-18 DIN ISO 2768-1m DESCRIPTION WE-LQSH SMT Semi-Shielded High Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE Saturation Power Inductor EMC & Inductive Solutions Max-Eyth-Str. 1 744050420047 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 4020 eiSos Valid 1/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 4,0 0,2 3,1 0,2 2,0 max. 3,3Typical Inductance vs. Current Characteristics: Typical Impedance Characteristics: 0.50 10000 0.45 0.40 1000 0.35 100 0.30 0.25 10 0.20 0.15 1 0.10 0.05 0 0.1 1 10 100 1000 0.00 Frequency MHz 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 Current A Z CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD ChriB 001.001 2019-11-18 DIN ISO 2768-1m DESCRIPTION WE-LQSH SMT Semi-Shielded High Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE Saturation Power Inductor EMC & Inductive Solutions Max-Eyth-Str. 1 744050420047 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 4020 eiSos Valid 2/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Inductance H Impedance