Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 100 kHz/ 10 mA 0.33 H 20% 5,5 I Rated Current T = 40 K 16.5 A max. R,40K I Performance Rated Current 1) T = 40 K 27.35 A max. RP,40K Saturation Current 10% I L/L < 10 % 20 A typ. SAT,10% I Saturation Current 30% L/L < 30 % 42.9 A typ. SAT,30% R DC Resistance 20 C 2.1 m 10% DC Self Resonant Frequency f 113 MHz typ. 4,5 min. res 4,9 0,4 1) refer to IEC 62024-2-2020 Solder Resist Certification: 6,65 0,2 no vias and traces in restricted area RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 Scale - 4:1 Halogen Free Conform JEDEC JS709B The width dimension of the soldering terminal is specified without coating Halogen Free Conform IEC 61249-2-21 Component Qualification AEC-Q200 Grade 1 Schematic: General Information: Ambient Temperature (referring -40 up to +85 C to I ) R Operating Temperature -40 up to +125 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Test conditions of Performance Rated Current: refer to IEC 62024-2, Class D (PCB Copper Width: 40 mm PCB Copper Thickness: 1000 m) Scale - 4:1 Temperature rise is highly dependent on many factors including PCB land pattern, trace size, and proximity to other components. Therefore, temperature rise should be verified in application conditions. Product Marking: Start of Winding CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking R33 (Inductance Code) EsAg 004.000 2021-06-16 DIN ISO 2768-1m DESCRIPTION WE-XHMI SMT Power Inductor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 744393440033 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 6030 eiSos Valid 1/5 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 1,3 0,1 6,45 0,2 2,75 0,25 +0,3 3,0 -0,2 0,6 0,3 1,45 2,55Packaging Specification - Tape: mm Packaging Specification - Reel: mm P0 D0 P2 T W3 W1 close to center B C top cover tape K0 T1 D1 A0 T2 W2 P1 detail B Carrier Tape Feeding direction End Start Cover tape B Cover Tape Chip Cavity Sprocket Hole No Component Components No Component min. 160 mm min. 100 mm Embossment Cover Tape Packaging is referred to the international standard IEC 60286 -3:2013 min. 400 mm A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D1 E1 E2 F Qty. A B C D N W1 W2 W3 W3 Tape Type Material (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (pcs.) Tolerance 2,0 min. min. min. min. + 2,0 max. min. max. typ. typ. +0,3/ -0,1 ref. max. typ. typ. 0,1 0,1 0,1 +0,1/ -0,0 min. 0,1 min. 0,1 Tape width 16 mm 330,00 1,50 12,80 20,20 60,00 16,40 22,40 15,90 19,40 2a 7,00 6,80 16,00 0,40 0,10 3,90 3,70 4,00 12,00 2,00 1,50 1,50 1,75 14,25 7,50 Polystyrene 1000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD EsAg 004.000 2021-06-16 DIN ISO 2768-1m DESCRIPTION WE-XHMI SMT Power Inductor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 744393440033 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 Pull-of force www.we-online.com 6030 eiSos Valid 2/5 16 mm eiSos we-online.com Tape width 0,1 N - 1,3 N This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 1 65 - 180 E2 F B0 G E1 W B1 D A N