Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 25 MHz L 620 nH 5% Q-Factor 50 MHz Q 23 min. DC Resistance 20 C R 2.7 max. DC Rated Current T = 15 K I 400 mA max. R Self Resonant Frequency f 188 MHz min. res 0,51 ref. 0,76 1,02 2,28 0,2 Scale - 15:1 Schematic: General Information: It is recommended that the temperature of the component does not exceed +125C under worst case conditions Ambient Temperature (refering to -40 C up to +110 C I ) R Operating Temperature -40 C up to +125 C Storage Temperature (in original -10C up to +40C, 30 to 70% RH max. packaging) Test conditions of Electrical Properties: +20C, 33% RH if not specified differently Scale - 15:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS JoMa DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-KI SMD Wire Wound Ceramic Tel. +49 (0) 79 42 945 - 0 ORDER CODE Inductor www.we-online.com 744760262C eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 005.003 Valid 2017-10-19 eiSos 1/5 0805C This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 1,7 0,2 1,27 ref. 0,5 ref. 1,28 0,2 1,78Packaging Specification - Tape and Reel: mm P0 D0 P2 T W3 W1 close to center B C top cover W2 tape D1 A0 T1 P1 T2 Carrier tape Feeding direction End Start Cover tape No Component Components No Component min. 160 mm min. 100 mm Cover Tape min. 400 mm A B C D N W1 W2 W3 W3 tolerance 2,0 min. min. min. min. +1,5 max. min. max. A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D1 E1 E2 F Tape Type 2a VPE / packaging unit Tape width 8 mm 178 1.5 12.8 20.2 50 8.4 14.4 7.9 10.9 tolerance typ. typ. +0,3 -0,1 0,1 max. typ. typ. 0,1 0,1 0,05 +0,1 -0,0 0,1 0,1 min. 0,05 pcs. size 0805C 1.82 2.4 8 0.22 0.1 1.72 1.5 4 4 2 1.5 1 1.75 6.25 3.5 Polystyrene 2000 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS JoMa DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-KI SMD Wire Wound Ceramic Tel. +49 (0) 79 42 945 - 0 ORDER CODE Inductor www.we-online.com 744760262C eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE Pull-of force 005.003 Valid 2017-10-19 eiSos 2/5 0805C 8 mm Tape width 0,1 N - 1,0 N This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 165 - 180 B0 F E2 E1 W D A N