A Dimensions: mm B Recommended land pattern: mm D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 1 kHz/ 250 mV L 6.8 H 20% Rated current T = 40 K I 2.91 A max. R Saturation current L/L < 10% I 3.3 A typ. sat DC Resistance 20C R 0.033 typ. DC DC Resistance 20C R 0.035 max. DC Self resonant frequency f 32 MHz typ. res C Schematic: E General information: It is recommended that the temperature of the part does not exceed 125C under worst case operating conditions. Ambient temperature: -40C to +85C (refering to I ) R Operating temperature: -40C to +125C Storage temperature (on tape & reel): -20C to +40C 75% RH max. Test conditions of Electrical Properties: 20C, 33% RH if not specified differently DESCRIPTION Component Marking: WE-PD SMD Shielded Power Inductor Reference on drawing Description 10.4 2015-05-18 SSt ALa Wrth Elektronik eiSos GmbH & Co. KG Start of winding EMC & Inductive Solutions 10.3 2014-06-16 SSt SSt Marking 6R8 (Inductance Code) Max-Eyth-Str. 1 10.2 2014-01-09 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 10.1 2013-04-24 SSt ALa Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7447779006 A4 10.0 2008-01-04 MST - eiSos we-online.com REV DATE BY CHECKED Size: 7345 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.F1 Typical Inductance vs. Current Characteristics: F2 Typical Impedance Characteristics: DESCRIPTION WE-PD SMD Shielded Power Inductor 10.4 2015-05-18 SSt ALa Wrth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions 10.3 2014-06-16 SSt SSt Max-Eyth-Str. 1 10.2 2014-01-09 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 10.1 2013-04-24 SSt ALa Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7447779006 A4 10.0 2008-01-04 MST - eiSos we-online.com REV DATE BY CHECKED Size: 7345 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.