6x 60,0 6,0 min. Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 2 Inductance L 10 kHz/ 0.1 mA 3 mH 50% O 5,0 Rated Current I 70 C 46 A max. 1 R Rated Voltage V 50 Hz 760 V (AC) max. detail A R 5 Insulation Test Voltage V 50 Hz/ 2 sec. 3000 V (AC) 3 6 T 4 6 1 Certification: 3 4 RoHS Approval Compliant 2011/65/EU&2015/863 5 1 REACh Approval Conform or declared (EC)1907/2006 A Halogen Free Conform JEDEC JS709B 2 Halogen Free Conform IEC 61249-2-21 6x O4,5 General Information: It is recommended that the temperature of the component does not exceed +125 C under worst case conditions Schematic: O 3,9 max. 3x O 1,6 typ. Ambient Temperature (referring -40 up to +70 C to I ) R Operating Temperature -40 up to +125 C O 70,0 max. Storage Conditions (in original 1 4 < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 2 65 Temperature Rise < 55 K Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently 3 6 7 Due to heavy weight, we recommend to fix the component on PCB (1,6 mm thickness) with a self tapping screw: 4,8x9,5mm CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD HasA 001.001 2019-02-28 DIN ISO 2768-1m DESCRIPTION WE-TPB HV Three-Phase Common Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Mode Power Line Choke Max-Eyth-Str. 1 744839003460 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 4XL eiSos Valid 1/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 5,0 u 1,0 39,0 max. O 60,0 O 25,0 3x 120,0Test Setup: Typical Insertion Loss: 40 35 Common Mode 30 25 6 20 7 Differential Mode 15 10 6 5 7 0 0.001 0.01 0.1 1 10 100 Frequency MHz A (comm) A (diff) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD HasA 001.001 2019-02-28 DIN ISO 2768-1m DESCRIPTION WE-TPB HV Three-Phase Common Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Mode Power Line Choke Max-Eyth-Str. 1 744839003460 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 4XL eiSos Valid 2/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Attenuation dB