A Dimensions: mm B Recommended hole pattern: mm D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 kHz/ 100 mV L 2x 22 mH min. Rated current 70C I 0.4 A max. R DC Resistance 20C R 2x 1.61 15% DC Rated voltage 50 Hz U 250 V (AC) max. R Insulation test voltage 50 Hz/ 5 mA/ 2 sec. U 2000 V (AC) T C Schematic: E General information: It is recommended that the temperature of the part does not exceed +125C under worst case conditions. Storage Temperature: -20C to 60C Operating Temperature: -40C to 125C Temperature Rise: < 55K Test conditions of Electrical Properties: 20C, 33% RH if not specified differently DESCRIPTION 2.5 2015-02-16 SSt IMA 2.4 2014-05-13 SSt SSt WE-FC Common Mode Power Line Choke 2.3 2014-01-07 SSt SSt Wrth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions 2.2 2013-04-30 SSt HasA Max-Eyth-Str. 1 2.1 2013-04-24 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 2.0 2013-01-23 SSt HasA Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7448640404 A4 1.0 2009-08-06 MST eiSos we-online.com REV DATE BY CHECKED Size: ET20V This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.F Typical Insertion Loss Characteristics: Test Setup: DESCRIPTION 2.5 2015-02-16 SSt IMA 2.4 2014-05-13 SSt SSt WE-FC Common Mode Power Line Choke 2.3 2014-01-07 SSt SSt Wrth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions 2.2 2013-04-30 SSt HasA Max-Eyth-Str. 1 2.1 2013-04-24 SSt SSt 74638 Waldenburg Order.- No. SIZE Germany 2.0 2013-01-23 SSt HasA Tel. +49 (0) 79 42 945 - 0 www.we-online.com 7448640404 A4 1.0 2009-08-06 MST eiSos we-online.com REV DATE BY CHECKED Size: ET20V This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.