Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 24,2 0,5 Number of windings N 2 Inductance L 10 kHz/ 100 mV 230 H 40% 6,6 1 4 Leakage Inductance L 10 kHz/ 100 mV 8.7 H typ. S Rated Current I 60 C 16 A max. R 2 3 DC Resistance R 20 C 3.6 m max. DC Rated Voltage V 50 Hz 250 V (AC) max. R 1 Insulation Test Voltage V 50 Hz/ 5 mA/ 2 sec. 1500 V (AC) 4 T 6,6 0,5 2 3 Certification: 24,2 RoHS Approval Compliant 2011/65/EU&2015/863 27,5 max. REACh Approval Conform or declared (EC)1907/2006 Scale - 1:1 Halogen Free Conform JEDEC JS709B Halogen Free Conform IEC 61249-2-21 O 1,4 0,1 General Information: 1 4 3 It is recommended that the temperature of the component does not exceed +115C under worst case conditions Ambient Temperature (referring -40 up to +60 C 2 1 2 to I ) R Operating Temperature -40 up to +115 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Scale - 1:1 Product Marking: Marking 7448680140 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking - Date Code YYWW SBir 002.000 2019-12-20 DIN ISO 2768-1m DESCRIPTION WE-LPCC Common Mode Power Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Line Choke Max-Eyth-Str. 1 7448680140 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 1/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 25,0 max. 14,5 0,5 4,5 0,5 10,4 max. O 1,7 14,5Typical Insertion Loss: Typical Impedance Characteristics: 30 10000,0 25 1000,0 20 15 100,0 10 10,0 5 0 1,0 0,001 0,01 0,1 1 10 100 1000 0,001 0,01 0,1 1 10 100 1000 Frequency MHz Frequency MHz Z (comm) Z (diff) A (comm) A (diff) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SBir 002.000 2019-12-20 DIN ISO 2768-1m DESCRIPTION WE-LPCC Common Mode Power Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Line Choke Max-Eyth-Str. 1 7448680140 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 2/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Attenuation dB Impedance