Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 18,75 0,5 Number of windings N 2 2 1 Inductance L 10 kHz/ 100 mV 10 mH +50%/-30% 18,75 Leakage Inductance L 100 kHz/ 100 mV 200 H typ. S 3 4 Rated Current 1 I 70 C/ T < 55 K 1.4 A max. R 1 Rated Current 2 I 40 C/ T< 85 K 1.7 A max. R 2 DC Resistance R 20 C 330 m max. DC 3 4 Rated Voltage V 50 Hz 250 V (AC) max. R Insulation Test Voltage V 50 Hz/ 5 mA/ 2 sec. 1.5 kV T 1 2 24,5 max. O 1,3 Certification: RoHS Approval Compliant 2011/65/EU&2015/863 Scale - 1,5:1 REACh Approval Conform or declared (EC)1907/2006 Schematic: q 0,7 0,1 General Information: Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Ambient Temperature (referring 1 4 -40 up to +70 C to I ) R Operating Temperature -40 up to +125 C 2 3 Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Scale - 1,5:1 Scale - 1,5:1 Product Marking: Marking 744869161103 YYWW CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SBir 001.000 2021-03-03 DIN ISO 2768-1m DESCRIPTION WE-FCLP Common Mode Power Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Line Choke Max-Eyth-Str. 1 744869161103 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com FT16H eiSos Valid 1/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 15,5 max. 10,0 0,5 3,5 0,5 14,5 max. 10,0Typical Attenuation: Typical Impedance Characteristics: 70 1000000 60 100000 50 10000 40 1000 30 100 20 10 10 0 1 0.001 0.01 0.1 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 Frequency MHz Frequency MHz A (comm) A (diff) Z (comm) Z (diff) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SBir 001.000 2021-03-03 DIN ISO 2768-1m DESCRIPTION WE-FCLP Common Mode Power Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Line Choke Max-Eyth-Str. 1 744869161103 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com FT16H eiSos Valid 2/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Attenuation dB Impedance