Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance L 250 MHz 26 nH 2% Q-Factor Q 250 MHz 27 min. R DC Resistance 20 C 0.275 max. DC 0,35 0,5 0,35 Rated Current I T = 20 K 700 mA max. R f Self Resonant Frequency 3150 MHz min. res 0,2 0,1 Certification: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 Halogen Free Conform JEDEC JS709B 1,1 0,1 Halogen Free Conform IEC 61249-2-21 Scale - 25:1 Component Qualification AEC-Q200 Grade 1 Schematic: General Information: Ambient Temperature (referring -40 up to +105 C to I ) R Operating Temperature -40 up to +125 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Scale - 25:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JoMa 003.000 2021-04-23 DIN ISO 2768-1m DESCRIPTION WE-KI HC SMT High Current Wire Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Wound Ceramic Inductor Max-Eyth-Str. 1 744916126 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 0402 eiSos Valid 1/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 0,6 0,1 0,5 0,1 0,6 0,1 0,65Typical Inductance vs. Frequency Characteristics: Q-Factor vs. Frequency: 100 80 60 10 40 1 20 0 0 10 100 1000 10000 10 100 1000 10000 Frequency MHz Frequency MHz CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JoMa 003.000 2021-04-23 DIN ISO 2768-1m DESCRIPTION WE-KI HC SMT High Current Wire Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Wound Ceramic Inductor Max-Eyth-Str. 1 744916126 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 0402 eiSos Valid 2/6 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Inductance nH Q-factor
