Dimensions: mm Drillhole specification for PCB: Properties: Properties Test conditions Value Unit Tol. Drill hole specification for chemical surfaces Material Brass detail B Surface Tin (O 1,60 -0,03 ) min. 0,10 Execution Press-Fit O 1,475 0,05 Tightening Torque 17 N*m Insertion Force 40 N per Pin min. 2,54 Extraction Force 1) 30 N per Pin min. 12,7 PCB Thickness min 1.6 mm PCB Thickness max 3.2 mm I Rated Current 20 C 350 A R sectional drawing A-A 1) min. 24hours after Press-Fit Process min. 25m copper max. 60m M 10 A Certification: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 Drillhole specification for PCB: Halogen Free Conform JEDEC JS709B Drill hole specification for HAL Halogen Free Conform IEC 61249-2-21 B A (O 1,60 -0,03 ) min. 0,10 General Information: O 1,45 0,05 Operating Temperature -55 up to +150 C Storage Conditions (for single 0 C up to + 40 C up to 75 % RH parts) Moisture Sensitivity Level (MSL) 1 Packaging Bulk max. 15m Sn min. 25m copper max. 60m Scale - 1:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SuPe 001.003 2021-04-09 DIN ISO 2768-1m DESCRIPTION WP-BUFU REDCUBE PRESS-FIT Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7461061 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Terminals with internal thread and full plain pin-plate eiCan Valid 1/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. q 16,0 21,0 12,7 Bevelled edge 0,3 0,2 around 11,0 3,5 0,2 17,5Packaging: Cautions and Warnings: The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is The following conditions apply to all goods within the product series of REDCUBE Press- lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured. Fit of Wrth Elektronik eiSos GmbH & Co. KG: Handling: General: The maximum permissible torques must be complied with to prevent mechanical destruction. REDCUBE Press-Fit right angled versions This electromechanical component was designed and manufactured for use in general electronic equipment. have to be fixed and hold in position when the screw is tightened. Otherwise the PCB can be damaged. Wrth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any Blind hole thread: the dimension of the thread length in the drawing (page 1) defines the minimum screw-in depth of a screw. External thread: the dimension of the shaft length in the drawing (page 1) includes the thread run-out. The usable thread length is equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are defined by DIN 76-1:2016-08 (Table 1, a1). especially required and/or if there is the possibility of direct damage or human injury. Electromechanical components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. customer. However, no responsibility is assumed for inaccuracies or incompleteness. The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the component may be damaged or dissolved. Do not drop or impact the components, the component may be damaged. The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. Wrth Elektronik products are qualified according to international standards. Wrth Elektronik does not warrant any customer qualified product characteristics beyond Wrth Elektroniks specifications, for its validity and sustainability over time. Product Specific: Press-Fit Technology: Follow all instructions in the datasheet, especially: Drill-hole specifications. Wave and reflow soldering is not applicable. During press-fit process, PCB should be supported by matrix against bending. Chip formation due to material displacement is permitted. Storage Conditions: Products shall be used within the period of 12 months based on the day of shipment. Do not expose the components to direct sunlight. The storage conditions in the original packaging are defined according to DIN EN 61760-2. The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SuPe 001.003 2021-04-09 DIN ISO 2768-1m DESCRIPTION WP-BUFU REDCUBE PRESS-FIT Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7461061 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Terminals with internal thread and full plain pin-plate eiCan Valid 2/3 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.