Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Frequency Range f 2400 - 2500 MHz 1 Insertion Loss IL 2400 - 2500 MHz 1 dB typ. 0,5 Insertion Loss IL 2400 - 2500 MHz 1.3 dB max. VSWR 2400 - 2500 MHz 2 max. 0,5 0,05 Phase Imbalance 2400 - 2500 MHz 180 10 Amplitude imbalance 2400 - 2500 MHz 2 dB max. Unbalanced Impedance 50 typ. +0,1 Balanced Impedance 100 typ. 0,2 -0,2 0,25 Certification: RoHS Approval Compliant 2011/65/EU&2015/863 0,3 0,1 Scale - 15:1 REACh Approval Conform or declared (EC)1907/2006 0,2 0,1 Halogen Free Conform JEDEC JS709B Halogen Free Conform IEC 61249-2-21 1,6 0,1 Unbalanced Port General Information: /4 /4 It is recommended that the temperature of the component does not exceed +85C under worst case conditions /4 /4 Storage Conditions (in original < 40 C < 75 % RH packaging) Operating Temperature -40 up to +85 C Balanced Port1 Balanced Port2 Moisture Sensitivity Level (MSL) 1 Test Board 748411EB3 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Scale - 15:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MuK 004.001 2019-03-26 DIN ISO 2768-1m DESCRIPTION WE-BAL Multilayer Chip Balun Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 748411245 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 0603 eiSos Valid 1/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 0,15 0,1 0,8 0,1 0,6 0,1 0,55 0,3 1,4Port3* Port1 Network Analyzer (50 ) Port2* GND 1 / *Impedance for ports 2 and 3= (Balanced impedance) 2 NO. Terminal Name NO. Terminal Name Unbalanced Port(IN) Balanced Port(OUT 1) NC NC GND or DC feed + RF GND Balanced Port(OUT 2) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MuK 004.001 2019-03-26 DIN ISO 2768-1m DESCRIPTION WE-BAL Multilayer Chip Balun Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 748411245 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 0603 eiSos Valid 2/7 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.