Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. 1,6 0,2 Frequency Range Min & Max 2400-2500 MHz 0,5 0,1 1,0 Frequency Range Min & Max 2 5000-6000 MHz VSWR 2400 - 2500 MHz 2 max. VSWR 2 5000 - 6000 MHz 2 max. 3 Impedance Z 50 typ. 1 2 1 2 G Peak Gain 2400 - 2500 MHz 3 dBi typ. peak 3 4 Peak Gain 2 G 5000 - 6000 MHz 3.3 dBi typ. peak2 1,5 0,2 Certification: 1,2 0,85 5,3 RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 Scale - 6:1 Halogen Free Conform JEDEC JS709B 5,2 0,3 Halogen Free Conform IEC 61249-2-21 Schematic: 0,45 0,25 General Information: It is recommended that the temperature of the component does not exceed +85C under worst case conditions Operating Temperature -40 up to +85 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitivity Level (MSL) 1 Test Board 748892245EB Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently Scale - 6:1 Marking Top side CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MuK 002.000 2021-07-06 DIN ISO 2768-1m DESCRIPTION WE-MCA Multilayer Chip Antenna Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7488922455 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 5.2 x 3.7 mm eiSos Valid 1/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 3,7 0,3 0,62 0,2 0,7 0,15 3,8 3,05 0,9Recommended Matching Circuit: mm Pin Configuration: Additional matching option Ground Pad GND 0 0,3 pF GND GND Feed Line Pad Feed Clearance area Matching 9,3 x 7,2 mm Circuit Additional matching option Pad GND Scale - 6:1 7,2 Scale - 3:1 The matching circuit shown has been designed based on the Wrth Elektronik evaluation board and cannot be reused. It is recommended to leave a Pi or T type matching circuit space for antenna matching circuit for other boards. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD MuK 002.000 2021-07-06 DIN ISO 2768-1m DESCRIPTION WE-MCA Multilayer Chip Antenna Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7488922455 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com 5.2 x 3.7 mm eiSos Valid 2/8 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 9,3 Feed No Connect