Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 125 kHz/ 10 mA L 10.2 H 10% Q-Factor 125 kHz/ 10 mA Q 130 typ. Rated Current T = 40 K I 9 A max. R Saturation Current I 18 A typ. O 2,0 SAT DC Resistance 20 C R 47 m typ. DC 1 2 DC Resistance 20 C R 50 m max. DC Self Resonant Frequency f 11 MHz 5,0 min. res 57,0 1,0 53,0 1,0 62,2 1,0 8,0 2,0 Glue Schematic: General Information: It is recommended that the temperature of the component does not exceed +105C under worst case conditions Operating Temperature -20 C up to +105 C Storage Conditions (in original < 40 C < 75 % RH packaging) Moisture Sensitive Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions FBo CSo DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-WPCC Wireless Power Tel. +49 (0) 79 42 945 - 0 ORDER CODE Transfer Receiver Coil www.we-online.com 760308103109 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-06-13 eiSos 1/6 5751 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 4,2 max. 51,0 1,0 3,2 max. 46,7 1,0 1,2 4,5 1,0Typical Inductance vs. Current Characteristics: Typical Inductance vs. Frequency Characteristics: 12.0 100 10.0 8.0 10 6.0 4.0 2.0 1 10 100 1000 10000 0.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 Frequency kHz Current A CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions FBo CSo DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany WE-WPCC Wireless Power Tel. +49 (0) 79 42 945 - 0 ORDER CODE Transfer Receiver Coil www.we-online.com 760308103109 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-06-13 eiSos 2/6 5751 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Inductance H Inductance H