Crystal Clock Oscillator Specification IQD Part No. + Packaging: LFSPXO083322RL3K Wurth Part No. 830208332209 Description LVDS output crystal oscillator in a hermetically sealed ceramic package with a seam sealed metal lid. Model IQXO-618-25 Model Issue number 2 Note: Operating temperature ranges -40 to 105C and -40 to 125C are intended for industrial use and not for safety critical applications such as automotive. Please contact IQD for alternative options. Frequency Parameters Frequency 100.0MHz Frequency Stability 50.00ppm Operating Temperature Range -40.00 to 105.00C Ageing 3ppm max per year at 25C Electrical Parameters 2.5V 5% Supply Voltage Outline (mm) Current Draw 50.000mA Output Details Output Compatibility LVDS Drive Capability 100 Rise & Fall Time (20 - 80%) 0.5ns max Duty Cycle 45/55% Differential Output Voltage (VOD): 0.247V min, 0.33V typ, 0.454V max Offset Voltage (VOS): 1.125V min, 1.250V typ, 1.375V max. Output Voltage Levels: Output Low (VOL): 0.9V min Output High (VOH): 1.6V max Output Control Standby Operation: Logic 1 (70% Vs) to pad 1 enables oscillator output. Logic 0 (30% Vs) to pad 1 disables oscillator output when disabled the oscillator output goes to the high impedance state. No connection to pad 1 enables oscillator output. Start-Up Time: 10ms max Standby Current: 10A max Noise Parameters Phase Jitter (12kHz to 20MHz): 1ps rms max CONTACT INFORMATION: Wrth Elektronik eiSos GmbH & Co. KG Email: eiSos we-online.de Max-Eyth-Str. 1, 74638 Waldenburg, Germany Web: www.we-online.com Tel: +49(0) 7942 945-0 Printed on 1 Sep 20 7:00 using WE Part Data Sheet V1.00019 Page 1 of 2Crystal Clock Oscillator Specification IQD Part No. + Packaging: LFSPXO083322RL3K Wurth Part No. 830208332209 Environmental Parameters Storage Temperature Range: -55 to 125C Drop Test (JIS-C0044): the specimen is measured for frequency before the test. It is then dropped from a height of 100cm min as a free fall object onto a hard wooden plate of thickness 30mm min. Vibration (MIL-STD-883F : 2007.3): the specimen is measured for frequency before the test. Test in X,Y and Z axes for the vibration test. Frequency range: 20~2000Hz, peak to peak amplitude: 1.52mm, peak acceleration: 20G, sweep time: 20 minute/axis, pendicular total test time: 4 hours. Low Temp Exposure (JIS-C0020): the specimen is measured for frequency before the test. Expose device to -40C3C for 1686 hours. Measure electrical performance after leaving 1~2 hours at room temperature. Ageing Test (JIS-C0021): the specimen is measured for frequency before the test. Expose device to +125C3C for 72048 hours. Measure electrical performance after leaving 1~2 hours at room temperature. High Temperature and Humidity (MIL-STD-883F : 1004.7): the specimen is measured for frequency before the test. Expose device to +85C5C and 855% humidity for 1686 hours. Measure electrical performance after leaving 1~2 hours at room temperature. Temperature Cycle Test (MIL-STD-883F : 1010.8): the specimen is measured for frequency before the test. Expose device to 100 cycles of: Low temp: -55C3C for153 min Ramp up to high temp: 2-3 mins High temp:+125C3C for153 min Ramp down to low temp: 2-3 mins Measure electrical performance after leaving 1~2 hours at room temperature. RoHS Terminations RoHS Reflow Temp 260C max for 10s max Compliance RoHS Status (2011/65/EU) Compliant REACh Status Compliant MSL Rating (JDEC-STD-033): Not Applicable Packaging Details Pack Style: RL3K Tape & reel in accordance with EIA-481-D Pack Size: 3,000 Alternative packing option available U S E F U L L I N K S Toolbox: www.we-online.com/toolbox Product Catalog: www.we-online.com/products CONTACT INFORMATION: Wrth Elektronik eiSos GmbH & Co. KG Email: eiSos we-online.de Max-Eyth-Str. 1, 74638 Waldenburg, Germany Web: www.we-online.com Tel: +49(0) 7942 945-0 Printed on 1 Sep 20 7:00 using WE Part Data Sheet V1.00019 Page 2 of 2