10,0 0,2 Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. detail A Capacitance 0.25 V/ 120 Hz/ +20 C C 3300 F 20% Rated Voltage U 63 V (DC) max. R Leakage Current 5 min./ +20 C I 4158 A max. LEAK Dissipation Factor 0.25 V/ 120 Hz/ +20 C DF 20 % max. Ripple Current 120 Hz 85 C I 3120 mA max. RIPPLE 10,0 0,2 A Schematic: - + General Information: Aluminum Electrolytic Capacitors Storage Conditions 5-35 C, < 75% RH Operating Temperature -40 C up to +85 C Endurance 2000 h / 63 V (DC) / max. Iripple Test conditions of Electrical Properties: +20C, 35% RH if not specified differently FIT according to separate documentation Vent Component conform to REACh and RoHS requirements and standards under cover Dimensions: Properties Value Unit Tol. CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD Diameter D 25 mm 1 EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Length L 30 mm 2 Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg ANBO300332M063DSIC3B000 Germany WCAP-AIG8 Aluminum Electrolytic Tel. +49 (0) 79 42 945 - 0 ORDER CODE Capacitors www.we-online.com 861010784009 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-01-20 eiCap 1/8 25 x 30 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. OD 6,0 1 L O 2,00,8 0,1 Instruction for optional fixation: A sectional drawing A-A Fixing C Material 1,5 0,1 B A detail C Fixing Material Fixing detail B Material max. 80% Capillary Joint CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg ANBO300332M063DSIC3B000 Germany WCAP-AIG8 Aluminum Electrolytic Tel. +49 (0) 79 42 945 - 0 ORDER CODE Capacitors www.we-online.com 861010784009 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-01-20 eiCap 2/8 25 x 30 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 2,5 0,1 6,0 1