Dimensions: mm Recommended Hole Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 0.25 V/ 120 Hz/ +20 C C 33 F 20% Rated Voltage U 100 V (DC) max. R Leakage Current 2 min./ +20 C I 660 A max. LEAK Dissipation Factor 0.25 V/ 120 Hz/ +20 C DF 12 % max. Ripple Current 100 kHz 105 C I 1600 mA max. P RIPPLE ESR 100 kHz 20 C R 50 m max. ESR p Schematic: - General Information: + OF Aluminum Polymer Capacitors Storage Conditions 5-35 C, < 75% RH Operating Temperature -55 C up to +105 C Endurance 2000 h / 100 V (DC) / max. Iripple Test conditions of Electrical Properties: +20C, 35% RH if not specified differently FIT according to separate documentation Component conform to REACh and RoHS requirements and standards Properties Value Unit Tol. Pitch 5 mm 0.5 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD Diameter D 10 mm 0.5 EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Length L 12.5 mm 1.5 Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg Pin Diameter F 0.6 mm 0.02 PTEF125330M100DSPA9B000 Germany WCAP-PTHR Aluminum Polymer Tel. +49 (0) 79 42 945 - 0 Pitch p 5 mm 0.5 ORDER CODE Capacitors Pin Hole Diameter f 0.9 mm 0.02 www.we-online.com 870055975003 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-03-01 eiCap 1/7 10.0 x 12.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. OD 5,0 min. 15,0 min. L OfComponent Marking: 1st Line Capacitance Value: 33 F & Rated Voltage: 100 V (DC) 2nd Line WCAP-PTHR 3rd Line max. Operating Temperature +105C & Date Code: YWW Multiplier for Ripple Current vs. Frequency Frequency 120 Hz freq. < 1 kHz 1 kHz freq. < 10 kHz 10 kHz freq. < 100 kHz 100 kHz freq. < 300 kHz Muliplier 0.05 0.3 0.7 1.0 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION TECHNICAL REFERENCE 74638 Waldenburg PTEF125330M100DSPA9B000 Germany WCAP-PTHR Aluminum Polymer Tel. +49 (0) 79 42 945 - 0 ORDER CODE Capacitors www.we-online.com 870055975003 eiSos we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2017-03-01 eiCap 2/7 10.0 x 12.5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.