Network Resistors SIP Series FEATURES Temperature Range: -55C ~ +125C Miniature, high density packaging Combinations of different ohmic value are available High reliability with RuO paste 2 Recommended wash method is alcohol DERATING CURVE Circuit 100 Construction Common Isolated 75 .... 50 ............... R1 R2 R3 Rn R1 R2 Rn 25 ............... n+1 2n-1 2n 12 34 1234 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 .......... R1 = R2 = = Rn R1 = R2 = = Rn Ambient Temperature (C) PART NUMBERING SYSTEM 26 4 - 1 00 K Series Value Dimensions: mm Pin One Indicated DIMENSIONS L 2.5 max. Series Number L max. of Pins (mm) Comm. Isol. 5.08 max. 264 267 6 15.3 265 268 8 20.4 3.2 0.5 266 269 10 25.4 1 2 3 4 ~ 14 pin configurations available special order. 2.54 0.2 0.5 0.10 STANDARD STOCKED VALUES () 10 51 150 470 1.2K 3.3K 8.2K 22K 68K 220K 680K 22 56 180 510 1.5K 3.9K 10K 27K 82K 270K 820K 27 68 220 560 1.8K 4.7K 12K 33K 100K 330K 1M 33 82 270 680 2K 5.1K 15K 39K 120K 390K 39 100 330 820 2.2K 5.6K 18K 47K 150K 470K 47 120 390 1K 2.7K 6.8K 20K 56K 180K 560K XICON PASSIVE COMPONENTS (800) 628-0544 XC-600047 Date Revised: 9/27/05 Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation. Rated Power (%)Network Resistors SIP Series CHARACTERISTICS Resistor Network-Sip RNL Series Test Methods Characteristics Limits (JIS C 5201-1) Temperature 200 PPMC for 50 ~ 1M -55C ~ +125C Coefficient 250 PPMC for< 50 or >1M Step Temperature Time 1 -55C 3C 30 mins Temperature 2 Room temp. 10~15 mins R (0.5% + 0.1) Cycling 3 +125C 3C 30 mins 4 Room temp. 10~15 mins * Step 1-4 Continuous 5 Cycles Resistors shall be clamped in the trough of a No evidence of flashover Dielectric Withstanding 90 metallic V-block and shall be tested at AC mechanical damage, arcing, potential respectively specified in the above Voltage or insulation break down. list for 60 +10/-0 seconds Short-time (0.5% + 0.1) Rated Voltage x 2.5 for 5 seconds. Overload Resistance to 350C 10C, for 3 seconds. (0.5% + 0.1) Soldering Heat Insulation 10,000M Min. 100VDC for 1 minute Resistance Terminal Tensile: 1Kg, 30 seconds (0.5% + 0.1) Strength Bending: 500g, 2 times Load V, Room Temp, 30 minute Thermal (0.5% + 0.1) Unload, -55C, 15 minutes Shock Over 2 hrs. in room temp. before measuring Solderability Covering 95% 245C 3C, 2-3 seconds 40C, 90-95% RH Load Life (3% + 0.1 ) Rated Voltage for 1,000 hrs. in Humidity (1.5 hour is ON, 0.5 hour is OFF) 70C at Rated Voltage for 1,000 hrs. Load Life (3% + 0.1 ) (1.5 hour is ON, 0.5 hour is OFF) XICON PASSIVE COMPONENTS (800) 628-0544 XC-600047 Date Revised: 9/27/05 Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.