xppower.com 36 70 Watts AED Series Low Profile Single Outputs from 5 V to 48 V Universal Input Optional Floating Output High Power Density Class II Insulation on 36 W Version 3 Year Warranty Specification Input General Input Voltage 90-264 VAC Efficiency 85% typical at 230 VAC & 100% load Input Frequency 47-63 Hz Isolation 3000 VAC Input to Output, 1500 VAC Input to Ground. Input Current AED36: 1.00 A max Negative output is connected to ground. AED45: 1.20 A max For optional 500 VAC output to ground AED70: 2.00 A max isolation add suffix -F to model number Inrush Current AED36: 50 A max at 230 VAC Switching Frequency 60 kHz 10 kHz AED45: 100 A max at 230 VAC 3 AED70: 100 A max at 240 VAC Power Density AED36: 5.34 W/in 3 AED45: 3.20 W/in Earth Leakage Current AED36: Class II 3 AED70: 4.98 W/in AED45/70: 3.5 mA max MTBF 200 kHrs to MIL-HDBK-217F at 25 C, GB Power Factor Compliant with EN61000-3-2 Environmental Output Operating Temperature 0 C to +60 C derate linearly from 100% Output Voltage See tables load at +40 C to 50% load at +60 C Initial Set Accuracy 2% Operating Humidity 93% RH, non-condensing Minimum Load No minimum load requirement Operating Altitude 2000 m Hold Up Time AED36: 8 ms min at 115 VAC Storage Temperature -20 C to +85 C AED45: 8 ms min at 115 VAC AED70: 20 ms min at 115 VAC EMC & Safety Line Regulation 1% Load Regulation See tables Emissions EN55022 Class B conducted & radiated Ripple & Noise 1% pk-pk max, 20 MHz BW (see note 2) Harmonic Currents EN61000-3-2, Class A Overvoltage Protection Typical 125% max Voltage Flicker EN61000-3-3 Overload Protection 120-150% hiccup/trip & restart mode ESD Immunity EN61000-4-2, 8 kV air, 4 kV contact with auto recovery Perf Criteria A Short Circuit Protection Continuous Radiated Immunity EN61000-4-3, 3 V/m Perf Criteria A Temperature 0.05%/C EFT/Burst EN61000-4-4, level 2 Perf Criteria A Coefficient Safety Approvals EN60950-1, UL60950-1 AC DCAC DC AED36 Models and Ratings Output Power Output Voltage Output Current Load Model (1) Maximum Nominal Maximum Regulation Number 20 W 5.0 V 4.00 A 6% AED36US05 27 W 9.0 V 3.00 A 5% AED36US09 30 W 12.0 V 2.50 A 5% AED36US12 32 W 13.5 V 2.40 A 5% AED36US13 36 W 15.0 V 2.40 A 3% AED36US15 36 W 18.0 V 2.00 A 2% AED36US18 36 W 24.0 V 1.50 A 2% AED36US24 36 W 48.0 V 0.75 A 2% AED36US48 Notes 1. Load regulation is measured from 60% to full load and from 60% to 20% load (60% 40% full load). 2. Measured at the output connector with a 0.1 F ceramic capacitor and a 10 F electrolytic capacitor. Mechanical Details 0.47 (12.00) Weight: 0.42 lbs (190 g) approx. Power Cord Order Part: UK - UK-MAINS-8 European - EU-MAINS-8 US - US-MAINS-8 4.33 (110) IEC320-C8 0.79 (20) 1.97 (50) Notes All dimensions shown in inches (mm) Output connector is 5.5mm dia. outer barrel, inner dia. is 2.5mm with a center + and outer shell - polarity. Optional output connectors available. Output cable is 48 (1220mm) approx.