xppower.com 50 150 Watts DLA Series AC Input LED Driver Constant Voltage & Constant Current High Power Factor High Efficiency Water Proof to IP67 High Input Voltage Range 3 Year Warranty Specification Input General Input Voltage DLA50-A & -V: 90-264 VAC, Efficiency See tables All other models: 90-305 VAC Isolation DLA50-A & -V: (Class II) Input Frequency 47-63 Hz 3000 VAC Input to Output 3000 VAC Input to Case Input Current 50 W: 0.70 A at 115 VAC, 0.35 A at 230 VAC, 500 VDC Output to Case 75 W: 0.9 A at 115 VAC, 0.40 A at 230 VAC, 120 W: 1.38 A at 115 VAC, 0.7 A at 230 VAC, All other models: (Class I) 150 W: 1.8 A at 115 VAC, 0.80 A at 230 VAC 3000 VAC Input to Output 1500 VAC Input to Ground Inrush Current 60 A at 230 VAC, cold start +25 C 500 VDC Output to Ground Power Factor See tables Switching Frequency PFC 30-90 kHz variable Earth Leakage Current 400 A max at 115 VAC, PWM 100-120 kHz typical 750 A max at 230 VAC MTBF >300 kHrs to MIL-HDBK-217F at 25 C, GB Output Output Voltage See table Environmental Initial Set Accuracy 1% for -V versions, Operating Temperature -35 C to +60 C for DLA50-A & -V, 5% for -A versions -35 C to +55 C for DLA50-VL Minimum Load No minimum load required -35 C to +70 C for others, DLA150 derate from 100% load at 65 C to 90% Start Up Delay 3 s max at 100 VAC load at 70 C Hold Up Time 10 ms minimum Operating Humidity 5-100% RH, non-condensing Line Regulation 1% maximum Storage Temperature -40 C to +80 C Load Regulation 3% maximum Operating Altitude 3000 m Transient Response 5% max. deviation, recovery to within Shock 30 g, 10 ms on 3 axes 1% in 10 ms for a 50% load change 2 Vibration 5-100 Hz, 2.31 m/s , 20 mins, 3 axes Ripple & Noise 1.5% max pk-pk, 20 MHz bandwidth Overvoltage Protection 110-140% Vnom, recycle input to reset EMC & Safety Overtemperature Unit shuts down, recycle input to reset Protection (Not on DLA50-A, -V or -VL) Emissions EN55015, Class B conducted and radiated Overload Protection 135% typical, auto recovery Harmonic Currents EN61000-3-2, Class C for DLA75,120 & 150 Short Circuit Protection Trip and restart (Hiccup mode) Voltage Flicker EN61000-3-3 Temperature 0.04%/C ESD Immunity EN61000-4-2, 8 kV air and 4 kV contact, Coefficient Perf Criteria A Radiated Immunity EN61000-4-3, level 2 Perf Criteria A EFT/Burst EN61000-4-4, level 2 Perf Criteria A Surge EN61000-4-5, level 3 Perf Criteria B Conducted Immunity EN61000-4-6, level 2 Perf Criteria A Dips & Interruptions EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B Safety Approvals EN61347, UL8750, CE Mark, some 50 W & 75 W models comply with UL1310 Class 2 requirement, see model table for details AC DCAC DC DLA50/75 Series Models and Ratings Constant Current Models Power Factor (1) Output Power Output Current Output Voltage Efficiency Model Number 110 VAC 220 VAC 50 W 350 mA 71.0 V - 142.0 V 88.0 % 0.87 0.85 DLA50PS350-A 50 W 450 mA 56.0 V - 111.0 V 88.0 % 0.87 0.85 DLA50PS450-A 50 W 700 mA 36.0 V - 72.0 V 88.0 % 0.87 0.85 DLA50PS700-A 50 W 1050 mA 24.0 V - 48.0 V 88.0 % 0.87 0.85 DLA50PS1050-A 50 W 1100 mA 23.0 V - 45.5 V 87.0 % 0.87 0.85 DLA50PS1190-A 50 W 1400 mA 18.0 V - 36.0 V 87.0 % 0.87 0.85 DLA50PS1400-A (3) 50 W 2100 mA 13.0 V - 24.0 V 86.0 % 0.87 0.85 DLA50PS2100-A (3) 50 W 2770 mA 9.0 V - 18.0 V 85.0 % 0.87 0.85 DLA50PS2770-A (3) 36 W 3000 mA 7.0 V - 12.0 V 84.0 % 0.87 0.85 DLA50PS3000-A (2) 75 W 350 mA 107.0 V - 214.0 V 92.0 % 0.99 0.96 DLA75PS350-A (2) 75 W 450 mA 83.0 V - 166.0 V 92.0 % 0.99 0.96 DLA75PS450-A (2) 75 W 700 mA 54.0 V - 108.0 V 91.0 % 0.99 0.96 DLA75PS700-A (2) 75 W 1050 mA 36.0 V - 72.0 V 90.0 % 0.99 0.96 DLA75PS1050-A (2) 75 W 1400 mA 27.0 V - 54.0 V 90.0 % 0.99 0.96 DLA75PS1400-A (2,3) 75 W 2100 mA 18.0 V - 36.0 V 89.0 % 0.99 0.96 DLA75PS2100-A (2) 75 W 2800 mA 13.0 V - 27.0 V 89.0 % 0.99 0.96 DLA75PS2800-A (2,3) 75 W 3750 mA 10.0 V - 20.0 V 88.0 % 0.99 0.96 DLA75PS3750-A (2,3) 75 W 5000 mA 7.0 V - 15.0 V 88.0 % 0.99 0.96 DLA75PS5000-A Constant Voltage Models Power Factor (1) Output Power Output Voltage Output Current Efficiency Model Number 110 VAC 220 VAC (3) 36 W 12.0 V 3.00 A 84.0 % 0.87 0.85 DLA50PS12-V (3) 50 W 24.0 V 2.10 A 86.0 % 0.87 0.85 DLA50PS24-V (2) (2,3) 50 W 12.0 V 4.20 A 82.0 % 0.99 0.92 DLA50PS12-VL (2) (2,3) 50 W 18.0 V 2.78 A 84.0 % 0.99 0.92 DLA50PS18-VL (2) (2,3) 50 W 24.0 V 2.10 A 84.0 % 0.99 0.92 DLA50PS24-VL (2) (2,3) 50 W 36.0 V 1.40 A 86.0 % 0.99 0.92 DLA50PS36-VL (2) (2,4) 50 W 48.0 V 1.05 A 87.0 % 0.99 0.92 DLA50PS48-VL 75 W 12.0 V 6.25 A 91.0 % 0.99 0.96 DLA75PS12-V 75 W 24.0 V 3.13 A 92.0 % 0.99 0.96 DLA75PS24-V 75 W 36.0 V 2.08 A 92.0 % 0.99 0.96 DLA75PS36-V 75 W 42.0 V 1.79 A 92.0 % 0.99 0.96 DLA75PS42-V 75 W 48.0 V 1.56 A 92.0 % 0.99 0.96 DLA75PS48-V 75 W 54.0 V 1.39 A 93.0 % 0.99 0.96 DLA75PS54-V 75 W 105.0 V 0.71 A 93.0 % 0.99 0.96 DLA75PS105-V Notes 1. Measured at 230 VAC input and full load. 3. Comply with UL1310 Class 2 requirements for US & Canada. 2. Output power derates linearly from 100% at 100 VAC input to 90% at 4. Comply with UL1310 Class 2 requirements for US. 90 VAC input. Mechanical Details DLA50 Weight: 1.01 lbs (460 g) DLA50-A & -V are Class II with 2 input conductors, DLA50-VL are Class I with 3 input conductors. Input cable is UL recognised. A DLA50-A &-V DLA50-VL B A 7.20 (183.0) 7.60 (193.0) C 0.21(5.5) B 6.37 (162.0) 6.77 (172.0) 0.31 (8.0) 0.19 (5.0) C 6.22 (158.0) 6.61 (168.0) AC IN DC OUT 1.67 D 6.81 (173.0) 7.20 (183.0) W (42.5) 0.31 (8.0) E 13.38 (340.0) 12.20 (310.0) 0.31 (8.0) 0.19 (5.0) 0.39 F 13.38 (340.0) 11.81 (300.0) 1.97 (50.0 2) 1.35 0.31 (8.0) (10.0 2) D (34.5) 0.02 (0.5) 0.02 (0.5) E F DLA75 A DLA75-V DLA75-A 0.41 (10.5) B 1.45 (37.0) A 7.79 (198.0) 6.46 (164.0) 0.15 (4.0) B 7.63 (194.0) 6.30 (160.0) 0.20 (5.0) C 7.08 (180.0) 5.75 (146.0) AC IN DC OUT 2.65 D 7.24 (184.0) 5.91 (150.0) (67.5) 0.31 (8.0) E 8.30 (211.0) 6.97 (177.0) 0.59 0.59 (15.0, (15.0, 0.02 (0.5) 0.02 (0.5) 0.5) 1.96 (50.0) 0.5) 1.33 (34.0) 1.97 (50.0, 2) 1.97 (50.0, 2) C Weight: DLA75-V: 2.09 lbs (950 g) 8.66 (220.0, 20) 25.59 (650.0, 20) D DLA75-A: 1.65 lbs (750 g) E Dimensions shown in inches (mm).