DC-HVDC Converter GP Series 1 Watt Output Voltages from 200V to 6kV 2xxx 2ries Output Voltage Proportional to Input Low Turn-on Voltage 0.7VDC Input to Output Isolation Dual Output Models No Minimum Load 3 Year Warranty The GP Series is a line of miniature high voltage converters that provide outputs up to 6kV, Dimensions: positive or negative in a compact PCB mount package. This line features low power GP Series: consumption, making it ideal for portable, battery powered applications. The isolated output is 1.50 x 1.50 x 0.63 (38.1 x 38.1 x 16.0mm) proportional to the input, and is linear from approximately 0.7 volts in. The isolated output allows for user selectable output polarity. Key Applications: Excellent filtering techniques and a low noise quasi-sinewave oscillator provide clean, reliable DC Mass Spectrometry to HV DC conversion with low ripple and low EMI/RFI. The GP Series units are component level Electrostatic Chucks converters that are easy to integrate, low cost, and come with decades of field proven reliability. Electrophoresis Capacitor Charging Particle Counter Ignition/Spark Sustaining Ion Pumps Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage 0.7 12 VDC Input Current, No Load 85 mA See Models and Ratings Table. Input Current, Full Load 175 mA See Models and Ratings Table. Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 6,000 VDC See Models and Ratings Table Output Current 5 mA See Models and Ratings Table Output Voltage Tolerance +3, -3 % At Max Vout, Full Load Minimum Load No minimum load required Regulation Unregulated, Output is proportional to Input. Unloaded output voltage is typically 10% higher than unloaded. Ripple and Noise 0.5 1.75 % See Models and Ratings Table. Response Time 20 msec 0 to Max Vout, Full Load G01 to G60 Notes 1. Maximum rated output current is available at maximum rated output voltage and 4. Proper thermal management techniques are required to maintain safe case derates linearly as input voltage is decreased. temperature at maximum power output. 2. Output voltage is load dependent. Under light or no-load conditions, reduce the 5. Models GP40, GP50, and GP60 do not have internal bleeder resistors on the input voltage so maximum rated output voltage is not exceeded. output. Provisions must be made externally to discharge the output capacitors. 3. Specifications after 30 minute warm-up, full load, at 25C unless otherwise indicated. www.xppower.com 1DC-HVDC Converter GP Series Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature (case) -20 +70 C Storage Temperature -20 +105 C Humidity 95 %RH Non-condensing Cooling Natural Convection General Characteristic Minimum Typical Maximum Units Notes & Conditions Isolation: Input to Output 3,500 V < 3500 Bias Switching Frequency 60 400 kHz Stable frequency over entire output voltage range. Construction Case material is Diallyl Phthalate (DAP). UL 94 V-0 rated solid vacuum encapsulation. Mean Time Between Failure 2.31 MHrs Bellcore TR 332 Block Diagram (+) In (+) Output Rectifier Oscillator & Multiplier (-) In (-) Output Transformer Models & Ratings Input Current Output Voltage Output Current Ripple Model Number No Load Full Load 0 to 200V 5mA <45mA <150mA <1.75% GP02 0 to 300V 3.3mA <45mA <125mA <0.5% GP03R 0 to 500V 2mA <15mA <125mA <0.5% GP05 0 to 600V 1.67mA <15mA <125mA <0.5% GP06R 0 to 1200V 0.84mA <25mA <125mA <0.75% GP12 0 to 1500V 0.66mA <20mA <125mA <0.75% GP15 0 to 2500V 0.4mA <30mA <130mA <1% GP25 0 to 3000V 0.34mA <40mA <130mA <1% GP30R 0 to 4000V 0.25mA <50mA <130mA <1% GP40 0 to 5000V 0.2mA <75mA <150mA <1.5% GP50 0 to 6000V 0.167mA <85mA <175mA <1% GP60 Notes 1. All orderable part numbers are listed above. 4. R suffix is used as a RoHS indicator for legacy models. www.xppower.com 2