HRC05 Series DC-HVDC CONVERTER CONVECTION 5W COOLED The HRC05 Series, is a miniature 5W regulated high voltage DC-DC converter product line providing voltages up to 6kV. HRC05 provides a well regulated and fully adjustable output voltage with built in short circuit and overload protection. The adjustable output voltage can be controlled from 0 to 100% with a 0 to +5VDC input. Voltage and current monitor outputs and a +5VDC reference output are included in the standard package for easier high voltage integration. The input control and output monitor signals are digital compatible making these modules an ideal solution for a wide range of high voltage applications. Typical Applications Features +24VDC Input (22 to 30V) Output Voltages up to 6kV 0 to 100% Programmable Output Voltage Mass Spectrometry Voltage & Current Monitor Output Electrophoresis On-board +5V Reference Electrostatic Chuck High Voltage Bias Load and line regulation <0.01% Capacitor charging Low Ripple <0.01% Detectors Short Circuit, Arc, and Overload Protections Scanning Electron Microscopy UL62368 and UL61010 Approvals Operating Temperature: -40C to +70C Dimensions 3 Year Warranty 2.55 x 1.30 x 0.60 (64.8 x 33.0 x 15.2 mm) Models & Ratings Input Current Model Number Output Voltage Model Number Output Voltage Output Current No Load Full Load HRC0524S350P 0 to +350V HRC0524S350N 0 to -350V 14.30mA 85mA 350mA HRC0524S600P 0 to +600V HRC0524S600N 0 to -600V 8.33mA 85mA 350mA HRC0524S1K0P 0 to +1000V HRC0524S1K0N 0 to -1000V 5.00mA 85mA 350mA HRC0524S1K5P 0 to +1500V HRC0524S1K5N 0 to -1500V 3.33mA 85mA 350mA HRC0524S2K0P 0 to +2000V HRC0524S2K0N 0 to -2000V 2.50mA 85mA 350mA HRC0524S3K0P 0 to +3000V HRC0524S3K0N 0 to -3000V 1.66mA 85mA 350mA HRC0524S4K0P 0 to +4000V HRC0524S4K0N 0 to -4000V 1.25mA 85mA 350mA HRC0524S5K0P 0 to +5000V HRC0524S5K0N 0 to -5000V 1.00mA 85mA 350mA HRC0524S6K0P 0 to +6000V HRC0524S6K0N 0 to -6000V 0.83mA 85mA 350mADC-HVDC CONVERTER HRC05 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 22 24 30 VDC 24V nominal Input Current, Full Load 350 mA 22VDC input Input Current, No Load 85 mA 22VDC input Input Undervoltage Lockout OFF/Shutdown <20.5V, ON/Restart >21.5V Input Overvoltage Protection OFF/Shutdown >33V, ON/Restart <30V Voltage Programming Input 0 5 VDC Controls output voltage 0 to 100%, see Signals. Overprogramming Protection 5.5 VDC 110% maximum Voltage Programming Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 6000 VDC See Models & Ratings table (6) Output Current 14.3 mA See Models & Ratings table Output Voltage is programmable via Analog DC Voltage Programming Output Programming 0 100 % Input (Vpgm) (4) Gain Adjust 5 % Potentiometer, see Mechanical Details (3) Setpoint Accuracy 1 % At maximum Vpgm, No Load (5) Linearity : Output vs Program 1.5 % Minimum Load No minimum load required Start Up Response 150msec for 4kV units Line Regulation 0.01 % At full load, maximum output voltage (22V to 30V input) Load Regulation 0.01 % 24Vin, maximum output voltage (0 to 100% load) Transient Response Overshoot <5%, (For 50% - 100% - 50% load change). Load transient duration <25msec (Vout returns to within 1%) Ripple and Noise 0.01 % 1MHz bandwidth Temperature Coefficient 100 ppm/C Stability 100 ppm/8hrs At 25C Short Circuit, Overload 100 % 110% overcurrent protection Overtemperature Protection 95 C Shutdown 95C typical, 5%, case temperature Notes: 1. Specifications aerft 30 minute warm-up, full load, 25C, unless otherwise noted. 2. Proper thermal management techniques are required to maintain safe case temperature. 3. Refers to the ability of the unit to accurately deliver the programmed voltage. 4. Refers to the ability to alter the gain of the circuit to allow for setpoint accuracy error. 5. Refers to how much the transfer function can deviate from a straight line in the absence of any setpoint error. 6. No current derating over temperature range. 2