IA2412S XP Power

DC-DC Converter IA Series 1 Watt Dual Output Unregulated SIP or DIP Package Industry Standard Pinout 1.0kV DC Isolation Operating Temperature -40C to +85C MTBF >1.1MHrs 3 Year Warranty Dimensions: IA SIP: 0.76 x 0.24 x 0.40 (19.3 x 6.09 x 10.16 mm) IA DIP: 0.80 x 0.40 x 0.25 (20.32 x 10.16 x 6.35 mm) Models & Ratings (2) (1) Input Voltage Output Voltage Output Current Efficiency Model Number 3.3VDC 5.0V 100 mA 66% IA0305S 3.3 V 151 mA 65% IA0503S 5.0 V 100 mA 74% IA0505S 9.0 V 55 mA 78% IA0509S 5VDC 12.0 V 42 mA 78% IA0512S 15.0 V 33 mA 80% IA0515S 24.0 V 21 mA 80% IA0524S 3.3 V 151 mA 66% IA1203S 5.0 V 100 mA 75% IA1205S 9.0 V 55 mA 76% IA1209S 12VDC 12.0 V 42 mA 78% IA1212S 15.0 V 33 mA 80% IA1215S 24.0 V 21 mA 76% IA1224S 3.3 V 151 mA 68% IA2403S 5.0 V 100 mA 74% IA2405S 9.0 V 55 mA 76% IA2409S 24VDC 12.0 V 42 mA 78% IA2412S 15.0 V 33 mA 78% IA2415S 24.0 V 21 mA 78% IA2424S Notes 1. Replace S in model number with D for DIP package. 2. Outputs power-trade. www.xppower.com 1DC-DC Converter IA Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 2.97 3.63 3.3V nominal 4.50 5.50 5V nominal Input Voltage Range VDC 10.80 13.20 12V nominal 21.60 26.40 24V nominal Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage VDC See Models and Ratings table Set Accuracy 3.0 % At full load No load wil not damage unit but may not meet all Minimum Load specifications Line Regulation 1.2 % For 1% Vin charge Load Regulation 10 % 20 to 100% (3.3 Vout 20%) 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 75 mV pk-pk capacitor. Maximum Capacitive Load 100 F Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency % See Models and Ratings table Isolation: Input to Output 1000 VDC 9 Isolation Resistance 10 Isolation Capacitance 60 pF Switching Frequency 80 kHz Variable Mean Time Between Failure 1.1 MHrs MIL-HDBK-217F, +25 C GB 0.00507 (2.3) SIP Weight lb (g) 0.00573 (2.6) DIP Water Wash Use de-ionized water only Pin Material Alloy 42 solder coated nickel iron Case Material Non-conductive black plastic UL94V-0 Potting Material Epoxy UL94V-0 rated Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +85 C Storage Temperature -40 +125 C Case Temperature +100 C Cooling Natural convection EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class A Class B / External Components EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions ESD EN61000-4-2 8 kV air discharge, 6 kV contact A Radiated EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 2 kV A With external components, see application notes Surge EN61000-4-5 1 kV A With external components, see application notes Conducted EN61000-4-6 10 V rms A www.xppower.com 2