IMM0112D05 XP Power

DC-DC Converter IMM01 Series 1 Watt World Wide Medical Approvals Single and Dual Outputs 2 A Patient Leakage Current SIP7 Package -20 C to +100 C Operation Full Load at 60 C Ambient 1500 VAC Isolation, 1 MOPP MTBF 1 MHrs 3 Year Warranty Dimensions: IMM01: 0.76 x 0.36 x 0.44 (19.5 x 9.2 x 11.1 mm) Models & Ratings Input current Maximum capacitive Input Voltage Output Voltage Output Current Model Number load No Load Full Load 3V3 303 mA 75 mA 337 mA 2200 F IMM0105S3V3 5 V 200 mA 75 mA 337 mA 2200 F IMM0105S05 12 V 83 mA 75 mA 327 mA 470 F IMM0105S12 15 V 67 mA 75 mA 327 mA 470 F IMM0105S15 4.5-9.0 V 3.3 V 150 mA 55 mA 337 mA 1000 F IMM0105D03 5 V 100 mA 55 mA 337 mA 1000 F IMM0105D05 12 V 42 mA 75 mA 327 mA 220 F IMM0105D12 15 V 33 mA 75 mA 327 mA 220 F IMM0105D15 3V3 303 mA 25 mA 163 mA 2200 F IMM0112S3V3 5 V 200 mA 25 mA 163 mA 2200 F IMM0112S05 12 V 83 mA 25 mA 150 mA 470 F IMM0112S12 15 V 67 mA 25 mA 150 mA 470 F IMM0112S15 9.0-18.0 V 3.3 V 150 mA 55 mA 163 mA 1000 F IMM0112D03 5 V 100 mA 55 mA 163 mA 1000 F IMM0112D05 12 V 42 mA 30 mA 150 mA 220 F IMM0112D12 15 V 33 mA 30 mA 150 mA 220 F IMM0112D15 0 Notes Input currents measured at low input voltage. Mechanical Details Pin Connections Pin Single Dual 1 -Vin -Vin 0.02 0.76 (19.5) 0.36 (9.20) (0.50) 2 +Vin +Vin Remote Remote Printed 3 On/Off On/Off Face Bottom View 0.36 0.01 0.42 0.44 (9.20) 5 +Vout +Vout (10.6) 0.12 (0.25) (11.1) 0.13 (3.0) (3.20) 6 -Vout Common 7 No Pin -Vout 0.08 0.02 1 2 3 5 6 7 (2.13) (0.50) 0.02 Notes (0.50) 1. All dimensions are in inches (mm) 0.10 2. Weight: 0.008 lbs (3.6 g) approx. (2.54) 3. Pin diameter: 0.020.002 (0.50.05) 0.6 (15.24) 4. Pin pitch tolerance: 0.014 (0.35) 5. Case tolerance: 0.02 (0.5) www.xppower.com 1 0DC-DC Converter IMM01 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 9 VDC 5 V nominal Input Voltage Range 9 18 VDC 12 V nominal 2 Inrush Current 0.05 A s Input Reflected Ripple Current 30 mA pk-pk Through 12 H inductor and 47 F capacitor 16 VDC for 100 ms 5 V models Input Surge 25 VDC for 100 ms 12 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Patient Leakage Current 2 A 2 3.3 V & 5.0 V at full load Initial Set Accuracy % 1 12.0 V & 15.0 V at full load Minimum Load 0% No minimum load required Line Regulation 0.5 % From minimum to maximum input Load Regulation 2.0 % From 10% to full load (2% from 0% to 10% load) On dual output models, when one output is at 25% load Cross Regulation 5 % and other is varied from 10% load to full load For 12 V & 15 V/ 3.3 V & 5 V models. 20 MHz bandwidth. Ripple & Noise 1/2 % pk-pk Measured using 0.1 Fceramic capacitor Short Circuit Protection Continuous fold-back mode, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.03 %/ C Overload Protection 190 250 310 % Of nominal output current at nominal input voltage Output is on if remote on/off (pin 3) is open Remote On/Off Output turns off if 2-4 mA is applied to remote on/off (pin 3) General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 64 78 81 % Typical value is for IMM0112S12 Isolation: Input to Output 1500 VAC At 250 VAC working voltage, 1 MOPP Switching Frequency 175 1000 kHz May enter burst mode frequency of 12-28 kHz at light load 9 Isolation Resistance 10 Isolation Capacitance 27 pF 3 Power Density 8.31 W/in Mean Time Between Failure 1 MHrs MIL-HDBK-217F, +25 C GB Weight 0.008 (3.6) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Altitude 3048 M Transport Altitude 10,000 Derate linearly from 100% load at +60 C to 0% at Operating Temperature -20 +100 C +100 C Storage Temperature -40 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2