DC-DC Converter XPPower IMM05 Series 5 Watts Regulated Single & Dual Outputs from 3.3 VDC to 15 VDC xxx Series World Wide Medical Certification 2:1 Input Range Ultra Compact SIP9 Package 1500 VAC Isolation 1 x MOPP at 250VAC Remote On/Off -20 C to +100 C Operation Full Load to +60 C Dimensions: 3 Year Warranty IMM05: 1.02 x 0.36 x 0.49 (26.0 x 9.3 x 12.5 mm) The IMM05 series of dc-dc converter offers an ultra compact 5W solution facilitating an isolation barrier between input and output with low leakage current required for medical BF & CF applications. Models & Ratings Input current Input Voltage Output Voltage Output Current Maximum capacitive Model Number VDC VDC mA load F No Load Full Load 3.3 V 1200 mA 105 mA 1100 mA 2200 F IMM0505S3V3 5.0 V 1000 mA 105 mA 1372 mA 1000 F IMM0505S05 12.0 V 416 mA 105 mA 1353 mA 470 F IMM0505S12 5V (4.5-9.0V) 15.0 V 333 mA 105 mA 1354 mA 330 F IMM0505S15 12.0 V 208 mA 105 mA 1387 mA 220 F IMM0505D12 15.0 V 166 mA 105 mA 1383 mA 168 F IMM0505D15 3.3 V 1200 mA 55 mA 550 mA 2200 F IMM0512S3V3 5.0 V 1000 mA 55 mA 678 mA 1000 F IMM0512S05 12.0 V 416 mA 55 mA 676 mA 470 F IMM0512S12 12V (9.0-18.0V) 15.0 V 333 mA 55 mA 677 mA 330 F IMM0512S15 12.0 V 208 mA 55 mA 676 mA 220 F IMM0512D12 15.0 V 166 mA 55 mA 675 mA 168 F IMM0512D15 3.3 V 1200 mA 30 mA 275 mA 2200 F IMM0524S3V3 5.0 V 1000 mA 30 mA 339 mA 1000 F IMM0524S05 12.0 V 416 mA 30 mA 334 mA 470 F IMM0524S12 24V 15.0 V 333 mA 30 mA 334 mA 330 F IMM0524S15 (18.0-36.0 V) 12.0 V 208 mA 30 mA 338 mA 220 F IMM0524D12 15.0 V 166 mA 30 mA 337 mA 168 F IMM0524D15 Notes Full load input current measured at minimum input voltage. Mechanical Details 1.02 (26.0) 0.36 (9.3) Printed 0.01 Pin Connections (0.25) Face DC-DC Converter 0.36 0.49 Pin Single Dual (9.3) 123 789 (12.5) IMM05 1 +Vin +Vin 2 -Vin -Vin 123 7 89 0.02 0.07 0.12 (0.50) Remote Remote 3 (1.7) (3.0) On/Off On/Off Notes 0.07 7 No Pin -Vout (1.8) 1. All dimensions are in inches (mm) 4. Pin pitch tolerance: 0.014 (0.35) 0.4 (10.16) 2 x 0.1 2 x 0.1 8 -Vout Common 2. Weight: 0.014 lbs (6.2 g) approx. 5. Case tolerance: 0.02 (0.5) (2 x 2.54) (2 x 2.54) 3. Pin diameter: 0.020.002 6. Stand-off tolerance: 0.004 (0.1) 9 +Vout +Vout (0.50.05) www.xppower.com 1DC-DC Converter XPPower IMM05 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 9 5 V nominal 9 18 12 V nominal Input Voltage Range VDC 18 36 24 V nominal 3.5 5 V nominal Inrush Current 1.5 A 12 V nominal 0.7 24 V nominal Input Reflected Ripple Current 30 mA pk-pk Through 12 H inductor and 47 F capacitor 15 5 V nominal Input Surge 25 VDC for 100 ms 12 V nominal 50 24 V nominal Input Current Remote On/Off 2.5 mA Idle current at Vin nominal Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Initial Set Accuracy 2 % At full load Minimum Load 0 % No minimum load required Line Regulation 0.5 % From min to max input voltage Load Regulation 2.0 % From 0-100% load On dual output models, when one output is at 25% load Cross Regulation 5 % and other is varied from 10% load to full load Deviation recovering to within 1% in 500 s for 25% load Transient Response Deviation 4 % change at 0.1 A/s Ripple & Noise 75 mV, pk-pk 20 MHz bandwidth. Measured using 0.1 F ceramic capacitor Short Circuit Protection Continuous fold-back mode, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.03 %/ C Overload Protection 140 % Of nominal output current at nominal input voltage Output is on if remote on/off (pin 3) is open Remote On/Off Output turns off if 2-4 mA is applied to remote on/off (pin 3). See application note. General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 82 % Isolation: Input to Output 1500 VAC At 250 VAC working voltage, basic insulation, 1 x MOPP, 60 s Switching Frequency 177 1300 kHz 9 Isolation Resistance 10 Isolation Capacitance 27 pF Leakage Current 2 A 3 Power Density 28 W/in Mean Time Between Failure 630 KHrs MIL-HDBK-217F, +25 C GB Weight 0.014 (6.2) lb (g) Case Material Non conductive black plastic Potting Material Epoxy (UL94V-0 rated) Pin Material C5191R-H matte tin coated Solder Process 260 C Waveflow. 0.05 (1.5mm) from case, 10 seconds max. Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -20 +100 C Derate from 100% load at +60 C to 50% at +80 C Storage Temperature -40 +125 C Case Temperature +105 C Humidity Op and Store 5 95 %RH Non-condensing Cooling Natural convection Altitude 5000 m Transport altitude 10 km Temperature Coefficient 0.03 %/C www.xppower.com 2