ISM0224S05 XP Power

DC-DC Converter XPPower ISM02 Series 2 Watt International medical safety approvals Single & dual unregulated outputs Compact SMD package 4kV VAC reinforced isolation 1 x MOPP at 300 VAC 2 A patient leakage current Operating temperature -25 C to +105 C Full load to 60C convection Tape & reel package available Dimensions: 3 year warranty ISM02: 0.94 x 0.71 x 0.36 (24.0 x 18.1 x 9.3 mm) The ISM02 provides a compact cost effective SMD solution for healthcare applications providing 1 MOPP, 2 MOOP and IEC60601-1 compliance. Features include a high operating temperature, low leakage current, reinforced insulation and short circuit protection. Models & Ratings (1) Output current Input current Maximum (6) (3) Input voltage Output voltage Efficiency Model number (2) capacitive load Max Min No load Full load 5 V 400 mA 8.0 mA 605 mA 330 F 72% ISM0205S05 12 V 165 mA 3.0 mA 600 mA 330 F 72% ISM0205S12 5V 15 V 133 mA 2.5 mA 90 mA 605 mA 330 F 72% ISM0205S15 (4.5-5.5V) 12 V 83 mA 1.5 mA 555 mA 100 F 72% ISM0205D12 15 V 66 mA 1.0 mA 540 mA 100 F 73% ISM0205D15 5 V 400 mA 8.0 mA 255 mA 330 F 70% ISM0212S05 12 V 165 mA 3.0 mA 250 mA 330 F 72% ISM0212S12 12V 15 V 133 mA 2.5 mA 40 mA 250 mA 330 F 72% ISM0212S15 (10.8-13.2V) 12 V 83 mA 1.5 mA 225 mA 100 F 74% ISM0212D12 15 V 66 mA 1.0 mA 220 mA 100 F 75% ISM0212D15 5 V 400 mA 8.0 mA 125 mA 330 F 68% ISM0224S05 12 V 165 mA 3.0 mA 125 mA 330 F 68% ISM0224S12 24V 15 V 133 mA 2.5 mA 30 mA 125 mA 330 F 68% ISM0224S15 (21.6-26.4V) 12 V 83 mA 1.5 mA 110 mA 100 F 74% ISM0224D12 15 V 66 mA 1.0 mA 110 mA 100 F 75% ISM0224D15 Notes 1. Input currents measured at nominal input voltage. 4. Add suffix -TR for tape and reel. MOQ 200 pcs. 2. Maximum capacitive load is per output. 5. Standard tube quantity 10 pcs. 3. For optional water washable version add suffix -P. 6. Measured at maximum load. www.xppower.com 1DC-DC Converter XPPower ISM02 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 5.5 5 V nominal Input Voltage Range 10.8 13.2 VDC 12 V nominal 21.6 26.4 24 V nominal Input Filter Internal Pi type filter 9 5 V nominal Input Surge 18 VDC for 1 s 12 V models 30 24 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 30 VDC See Models and Ratings table Initial Set Accuracy 2.0 4.0 % Output Voltage Balance 0.1 1.0 % For dual output with balanced loads Minimum Load A See Models and Ratings table Line Regulation 1.2 1.5 % Load Regulation 10 % From 20% to 100% load. 5V output version is 12% max On dual output models when one load is varied between Cross Regulation 5.0 % 25% and 100% and other is fixed at 100% Recovery within 1% in less than 250 s for a 25% load Transient Response 3 5 % deviation change. 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 150 mV pk-pk capacitor. Short Circuit Protection 0.5 s With auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C See derating curve Storage Temperature -50 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection Safety Approvals Safety Agency Safety Standard Notes & Conditions CB Medical IEC60601-1 UL Medical ANSI AMMI ES60601-1 EN Medical EN60601-1 UL ITE UL/cUL60950-1, UL/cUL62368-1 CE Meets all applicable directives UKCA Meets all applicable legislation www.xppower.com 2 Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 72 % See Models and Ratings table 4000 VAC 60 s, reinforced isolation at 300 VAC, 1 x MOPP/2 x MOOP Isolation: Input to Output 6000 VDC 1 s Leakage Current 2 A 240 VAC, 60 Hz 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 15 20 pF Switching Frequency 50 80 100 kHz 3 Power Density 12.2 W/in Mean Time Between Failure 2 MHrs MIL-HDBK-217F, +25 C GB Lead-Free Reflow Solder Process IPC/JEDEC J-STD-020D.1 Case Material Non conductive black plastic. UL94V-0 rated. Not suitable for water washing. Pin Material Solder-coated phosphor bronze Weight 0.01 (3.75) lb (g) Moisture Sensitivity Level Level 2 IPC/JEDEC J-STD-020D.1