DC-DC Converter XPPower ISV02 Series 2 Watt Single & dual regulated outputs xxx Series Wide 4:1 input range Ultra-compact SMD package 3.0kV isolation qualification tested Class A conducted emissions Tape & reel package available -40C to +75C operating temperature Full power to +75C 3 year warranty Dimensions: ISV02: 0.58 x 0.56 x 0.35 (14.65 x 14.40 x 8.95 mm) The ISV02 series is a compact SMD, open frame construction providing a cost effective DC-DC converter with high performance features such as 3.0kV isolation, 4:1 input range, full load operating temperature to 75C, remote on/off, high reliabity and short circuit protection. Available in single or dual output versions this product family is ideal for signal conditioning and voltage matching. Models & Ratings Input Maximum Efficiency Vin (Min) (3) Input Voltage Output Voltage Output Current Model Number Capacitive Load with full load No Load Full Load 5V 400mA 214mA 1000 F 78% ISV0212S05 12V 167mA 211mA 220F 80% ISV0212S12 12V 15V 133mA 50mA 206mA 100F 81% ISV0212S15 (4.5 - 18V) 12V 83mA 211mA 100F 79% ISV0212D12 15V 67mA 206mA 47F 81% ISV0212D15 5V 400mA 108mA 1000 F 78% ISV0224S05 12V 167mA 105mA 220F 79% ISV0224S12 24V 15V 133mA 30mA 103mA 100F 81% ISV0224S15 (9 - 36V) 12V 83mA 107mA 100F 78% ISV0224D12 15V 67mA 103mA 47F 81% ISV0224D15 Notes 1. Input currents measured at nominal input voltage. 3. For optional tape & reel package version, add suffix -TR e.g. ISV0212S05-TR. 2. Maximum capacitive load is per output. Reel size 200 pcs. 4. Standard tube size is 30pcs. Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 18.0 12V nominal Input Voltage Range VDC 9.0 36.0 24V nominal Input Filter Internal Capacitor 25 12V nominal Input Surge VDC for 100ms 50 24V nominal Input Reflected Ripple Current 20 mA pk-pk Measured with 12 H inductance with 47 F input capacitor 1 A 12V nominal. Recommended slow blow type Recommended Input Fuse 0.5 A 24V nominal. Recommended slow blow type On: 4.1VDC, Off: 3.5VDC 12V nominal input: Auto recovery Undervoltage Lockout On: 8.5VDC, Off: 7.0VDC 24V nominal input: Auto recovery Module On if pin 3 is open circuit. Remote On/Off See application note. Module Off if 2-4mA is applied Standby Mode Input Current 3 mA When module inhibited www.xppower.com 1DC-DC Converter XPPower ISV02 Series Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 30 VDC See Models and Ratings table Initial Set Accuracy 1 % Output Voltage Balance 5 % For dual output with 100% load and 25-100% load Minimum Load 0 % Minimum load required for voltage regulation Line Regulation 0.2 % Load Regulation 0.5 % Measured from no load to 100% load Maximum deviation when Vin is nominal and load change Transient Response 3 % from 100% to 25% in 25% step changes. Recovery time 500 S typically For dual output models with one output at 25% to 100% Cross Regulation 5 % with the second output at 100% load Single/Dual Output. 20 MHz bandwidth. Measured using 10 F electrolytic capacitor in parallel with 0.1 F ceramic Ripple & Noise 100 mV pk-pk capacitor. Module On if pin 3 is open circuit. Module Off if 2-4mA is applied Short Circuit Protection Auto recovery, continuous Maximum Capacitive Load F See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See Models and Ratings table 60s qualification test, 3s production test. Isolation: Input to Output 3000 VDC Working voltage 100 Vrms/150VDC insulation designation for safety approvals: functional 9 Isolation Resistance 10 At 3000 VDC Isolation Capacitance 25 pF Switching Frequency kHz See application notes 3 Power Density 22 W/in Mean Time Between Failure 890 KHrs MIL-HDBK-217F, +25 C GB, TBC Weight 0.004 (2.0) lb (g) Moisture Sensitivity Level Level 1 IPC/JEDEC J-STD-020D.1 PCB Pad Material Solder coated phosphor bronze C5191R-H Vibration Tested to MIL-STD 810F Cat 24, 514. 5C-17 Random Vibration Case Material Non conductive black plastic, UL94V-0 Rated Lead-Free Reflow Solder Process IPC/JEDEC J-STD-020D.1 (water wash permitted with deionised water, dry thoroughly) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +75 C Storage Temperature -55 +125 C Humidity 95 %RH Non-condensing Cooling Natural convection EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class A See application notes Radiated EN55032 Class A EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions ESD Immunity EN61000-4-2 8 kV/4kV A Air Discharge/Contact Discharge Radiated Immunity EN61000-4-3 10V/m A EFT/Burst EN61000-4-4 2 kV A External components required, see application notes. Surge EN61000-4-5 2 kV A External components required, see application notes Conducted Immunity EN61000-4-6 10 V rms A Magnetic Fields EN61000-4-8 100 A/m A www.xppower.com 2