ISW1215A-H XP Power

DC-DC Converter ISW Series 1 Watt Single Output xxx Series SMD Package Industry Standard Pinout Regulated Output Operating Temperature -40 C to +85 C 1500 VDC Isolation, 3000 VDC Option 3 Year Warranty Dimensions: ISW: 0.600 x 0.44 x 0.285 (15.24 x 11.2 x 7.25 mm) Models & Ratings (3) Input Current Maximum Input Voltage Output Voltage Output Current Efficiency Model Number Capacitive Load No Load Full Load (1) 3.3 V 243 mA 15 mA 270 mA 220 F 58% ISW0503A (1) 5 V 200 mA 15 mA 270 mA 220 F 72% ISW0505A 4.75-5.25 (1) 12 V 84 mA 15 mA 270 mA 220 F 73% ISW0512A (1) 15 V 67 mA 15 mA 270 mA 220 F 74% ISW0515A (1) 5 V 200 mA 10 mA 115 mA 220 F 73% ISW1205A (1) 11.4-12.6 12 V 84 mA 10 mA 115 mA 220 F 73% ISW1212A 15 V 67 mA 10 mA 115 mA 220 F 75% ISW1215A (1) 5 V 200 mA 7 mA 56 mA 220 F 73% ISW2405A 22.8-25.2 (1) 12 V 84 mA 7 mA 56 mA 220 F 73% ISW2412A Notes 1. For optional 3000 VDC isolation add suffix -H to end of part number e.g. 3. Typical value at full load. ISW1224A-H. 2. Input currents measured at nominal input voltage. Mechanical Details Recommended Footprint Top View grid: 0.1 x 0.1 in (2.54 x 2.54 mm) 0.6000.020 (15.240.5) 10 7 12 4 5 10 7 Front View 8.30 0.4410.012 Top View (0.327) (11.200.3) 0.039 0.480 12 4 5 0.100 (1.00) (12.20) (2.54) 0.400 0.024 0.1 (10.16) (0.60) (2.54) 0.4 (10.16) PIN CONNECTIONS Pin Function A 1 GND 2 Vin A 4 0 V 0.010 0.035 5 0 V 5.00 (0.25) (0.88) 7 +Vo 10 NC Notes 1. All dimensions are in inches (mm) 4. Pin pitch and length tolerance: 0.014 (0.35) 2. Weight: 0.004 lbs (2.0 g) typical. 5. Case tolerance: 0.02 (0.5) 3. Pin diameter: 0.02 0.002 (0.5 0.005) www.xppower.com 1 0.4410.012 (11.200.30) 0.327 (8.30) 0.285 (7.25) 0.276 (7.00)DC-DC Converter ISW Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.75 5.25 VDC 5 V nominal Input Voltage Range 11.4 12.6 VDC 12 V nominal 22.8 25.2 VDC 24 V nominal Input Current See Models and Ratings table Input Reflected Ripple 15 mA pk-pk Through 12 H inductor and 47 F capacitor 9 VDC for 1 s 5 V models Input Surge 18 VDC for 1 s 12 V models 30 VDC for 1 s 24 V models Input Filter Capacitor Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 15 VDC See Models and Ratings table Initial Set Accuracy 3 % At 100% load Minimum Load 10 % Line Regulation 0.25 % Per 1% change of input voltage (1.5% for 3V3 output) 3% 3.3 V output from 10%, full load Load Regulation 2% Other outputs from 10%, full load Start Up Delay 2 ms Ripple and Noise 50 mV pk-pk 20 MHz bandwidth, measured using 0.1 F capacitor Transient Response 3 % deviation Recovery to within 1% in 500 s for a 25% load change Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load 220 F Temperature Coefficient 0.03 %/C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency See Models and Ratings table Isolation: Input to Output For optional high isolation versions, 3000 VDC input to 1500 VDC output add suffix -H to model number Switching Frequency 50 300 kHz 9 Isolation Resistance 10 Input to output, tested at 500 VDC Isolation Capacitance 20 Input to output pF 3 Power Density 13.3 Win Mean Time Between Failure 3500 kHrs MIL-HDBK-217F, +25 C GB Weight 0.004 (2.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +85 C Derate from 100% load at +70 C to 60% load at 85 C Storage Temperature -55 +125 C Case Temperature +115 C Operating Humidity 95 % RH Non-condensing Cooling Natural convection www.xppower.com 2