ITB1212S XP Power

DC-DC Converter ITB Series 1 Watts Single Output xxx Series SIP Package -40 C to +105 C Operation Full Load at 95 C Ambient Single Outputs 1500 VDC Isolation Class B Conducted & Radiated Emissions MTBF >3.5 MHrs 3 Year Warranty Dimensions: ITB: 0.76 x 0.24 x 0.39 (19.5 x 6.0 x 10.0 mm) Models & Ratings (1) Input Current Maximum (3) Input Voltage Output Voltage Output Current Efficiency Model Number (2) Capacitive Load No Load Full Load 5 V 200 mA 30 mA 253 mA 220 F 80% ITB0505S 5V 12 V 83.3 mA 30 mA 253 mA 100 F 81% ITB0512S 15 V 66.7 mA 30 mA 253 mA 100 F 81% ITB0515S 5 V 200 mA 15 mA 106 mA 220 F 80% ITB1205S 12V 12 V 83.3 mA 15 mA 106 mA 100 F 80% ITB1212S 15 V 66.7 mA 15 mA 104 mA 100 F 81% ITB1215S 5 V 200 mA 7 mA 53 mA 220 F 81% ITB2405S 24V 12 V 83.3 mA 7 mA 53 mA 100 F 80% ITB2412S 15 V 66.7 mA 7 mA 53 mA 100 F 80% ITB2415S Notes Input currents measured at nominal input voltage. Mechanical Details 0.76 0.24 (19.5) (6.00) Printed Face Pin Connections 0.37 0.39 Pin Single (9.50) (10.0) 1 +Vin 0.02 2 -Vin (0.50) 0.12 4 -Vout (3.05) 5 No Pin 0.10 6 +Vout (2.54) 0.60 (15.24) 7 No Pin 0.02 Notes (0.50) 1. All dimensions are in inches (mm) 2. Weight: 0.0053lbs (2.4 g) approx. 0.24 0.05 3. Pin diameter: 0.020.002 (0.50.05) (6.00) (1.25) 0.01 4. Pin pitch tolerance: 0.014 (0.35) (0.25) 5. Case tolerance: 0.02 (0.5) 0.02 (0.50) www.xppower.com 1DC-DC Converter ITB Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 5.5 VDC 5 V nominal Input Voltage Range 10.8 13.2 VDC 12 V nominal 21.6 26.4 VDC 24 V nominal Input Filter Capacitor Input Reflected Ripple 15 mA pk-pk Through 12 H inductor and 47 F capacitor 9 VDC for 1000 ms 5 V models Input Surge 18 VDC for 1000 ms 12 V models 30 VDC for 1000 ms 24 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 15 VDC See Models and Ratings table Initial Set Accuracy 5 % At 70% load Minimum load required to meet specification. Operation at Minimum Load 10 % no load will not cause damage. Line Regulation 1.2 %/1%Vin Load Regulation +5, -2.5 % From 10% to full load from 70% load point Ripple & Noise 60 mV pk-pk 20 MHz bandwidth. Measured using 0.1 Fceramic capacitor Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See Models and Ratings table Isolation: Input to Output 1500 VDC Switching Frequency 40/50 50/70 kHz 5 V/12-24 V input 9 Isolation Resistance 10 Isolation Capacitance 50 pF 3 Power Density 14 Win Mean Time Between Failure 3.6 MHrs MIL-HDBK-217F, +25 C GB Weight 0.0053 (2.4) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C Derate from 100% load at +95 C to 90% at +105 C Storage Temperature -55 +125 C Case Temperature +115 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2