ITV2412S XP Power

DC-DC Converter XPPower ITV Series 1 Watts Single & dual output, unregulated xxx Series -40 C to +105 C operation SIP7 package Full load at 95 C ambient 3000 VDC isolation, functional Class B radiated emissions MTBF >3.5 MHrs 3 year warranty Dimensions: The ITV series of unregulated DC-DC modules provides an exceptional high operating ITV: temperature range while remaining cost effective. Features include short circuit protection 0.76 x 0.24 x 0.39 (19.5 x 6.0 x 10.0 mm) and a robust encapsulated package. Models & Ratings (1) Input Current Maximum (3) Input Voltage Output Voltage Output Current Efficiency Model Number (2) Capacitive Load No Load Full Load 5 V 200 mA 30 mA 253 mA 220 F 80% ITV0505SA 12 V 83.3 mA 30 mA 253 mA 100 F 80% ITV0512SA 15 V 66.7 mA 30 mA 253 mA 100 F 80% ITV0515SA 5 V 5 V 100 mA 30 mA 253 mA 100 F 80% ITV0505S 12 V 41.6 mA 30 mA 250 mA 47 F 81% ITV0512S 15 V 33.3 mA 30 mA 250 mA 47 F 81% ITV0515S 5 V 200 mA 15 mA 106 mA 220 F 80% ITV1205SA 12 V 83.3 mA 15 mA 106 mA 100 F 80% ITV1212SA 15 V 66.7 mA 15 mA 104 mA 100 F 81% ITV1215SA 12 V 5 V 100 mA 15 mA 106 mA 100 F 80% ITV1205S 12 V 41.6 mA 15 mA 106 mA 47 F 80% ITV1212S 15 V 33.3 mA 15 mA 104 mA 47 F 81% ITV1215S 5 V 200 mA 7 mA 53 mA 220 F 80% ITV2405SA 12 V 83.3 mA 7 mA 53 mA 100 F 80% ITV2412SA 15 V 66.7 mA 7 mA 53 mA 100 F 80% ITV2415SA 24 V 5 V 100 mA 7 mA 53 mA 100 F 80% ITV2405S 12 V 41.6 mA 7 mA 53 mA 47 F 80% ITV2412S 15 V 33.3 mA 7 mA 53 mA 47 F 80% ITV2415S Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. Measured at nominal input voltage and full load. www.xppower.com 1DC-DC Converter XPPower ITV Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 5.5 VDC 5 V nominal Input Voltage Range 10.8 13.2 VDC 12 V nominal 21.6 26.4 VDC 24 V nominal Input Filter Capacitor Input Reflected Ripple 15 mA pk-pk Through 12 H inductor and 47 F capacitor 9 VDC for 1000 ms 5 V models Input Surge 18 VDC for 1000 ms 12 V models 30 VDC for 1000 ms 24 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 15 VDC See Models and Ratings table Initial Set Accuracy 5 % At 70% load Minimum load required to meet specification. Operation at Minimum Load 10 % no load will not cause damage. Line Regulation 1.2 %/1%Vin Load Regulation +5, -2.5 % From 10% to full load from 70% load point On dual output models when one load is varied between Cross Regulation 5 % 25% and 100% and other is fixed at 100% Ripple & Noise 60 mV pk-pk 20 MHz bandwidth. Measured using 0.1 F ceramic capacitor Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See Models and Ratings table Isolation: Input to Output 3000 VDC 60s qualification. Functional insulation. Working Voltage 100 VAC Switching Frequency 40/50 50/70 kHz 5 V/12-24 V input 9 Isolation Resistance 10 Isolation Capacitance 50 pF 3 Power Density 14 Win Mean Time Between Failure 3.6 MHrs MIL-HDBK-217F, +25 C GB Pin Type Solder coated phospher bronze C5191R-H Case Material Non conductive black plastic UL94V-0 rated Potting Material Epoxy UL94V-0 rated Solder Profile 260C maximum 1.5mm from case, up to 10s max Weight 0.0053 (2.4) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C Derate from 100% load at +95 C to 90% at +105 C Storage Temperature -55 +125 C Case Temperature +115 C Humidity 95 %RH Non-condensing Cooling Natural convection Safety Approvals Safety Agency Safety Standard Notes & Conditions CE Meets all applicable directives UKCA Meets all applicable legislation www.xppower.com