ITW1224SA XP Power

DC-DC Converter XPPower ITW Series 1 Watt 2:1 Input Range xxx Series Operating Temperature -40 C to +105 C ITE safety approval Single & Dual Outputs 1500 VDC Isolation Fully Regulated Output No Minimum Load Required 3 Year Warranty Dimensions: ITW: 0.67 x 0.43 x 0.30 (17.0 x 11.0 x 7.6 mm) Models & Ratings (1) Input Current Maximum Input Voltage Output Voltage Output Current Efficiency Model Number Capacitive Load No Load Full Load 5.0 V 200 mA 35 mA 263 mA 1680 F 76% ITW0505SA 12.0 V 83 mA 35 mA 259 mA 820 F 79% ITW0512SA 15.0 V 67 mA 35 mA 254 mA 680 F 80% ITW0515SA 4.5-9 V 24.0 V 42 mA 35 mA 265 mA 470 F 80% ITW0524SA 12.0 V 42 mA 35 mA 259 mA 470 F 77% ITW0512S 15.0 V 33 mA 35 mA 254 mA 330 F 79% ITW0515S 5.0 V 200 mA 20 mA 108 mA 1680 F 78% ITW1205SA 12.0 V 83 mA 20 mA 108 mA 820 F 80% ITW1212SA 15.0 V 67 mA 20 mA 105 mA 680 F 81% ITW1215SA 9-18 V 24.0 V 42 mA 20 mA 109 mA 470 F 80% ITW1224SA 12.0 V 42 mA 20 mA 108 mA 470 F 79% ITW1212S 15.0 V 33 mA 20 mA 105 mA 330 F 80% ITW1215S 5.0 V 200 mA 10 mA 54 mA 1680 F 78% ITW2405SA 12.0 V 83 mA 10 mA 52 mA 820 F 80% ITW2412SA 15.0 V 67 mA 10 mA 52 mA 680 F 80% ITW2415SA 18-36 V 24.0 V 42 mA 10 mA 55 mA 470 F 81% ITW2424SA 12.0 V 42 mA 10 mA 52 mA 470 F 80% ITW2412S 15.0 V 33 mA 10 mA 52 mA 330 F 79% ITW2415S 5.0 V 200 mA 7 mA 27 mA 1680 F 76% ITW4805SA 12.0 V 83 mA 7 mA 27 mA 820 F 78% ITW4812SA 15.0 V 67 mA 7 mA 27 mA 680 F 78% ITW4815SA 36-75 V 24.0 V 42 mA 7 mA 28 mA 470 F 77% ITW4824SA 12.0 V 42 mA 7 mA 27 mA 470 F 77% ITW4812S 15.0 V 33 mA 7 mA 27 mA 330 F 77% ITW4815S Notes 1. Input currents measured at nominal input voltage. www.xppower.com 1DC-DC Converter XPPower ITW Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 9 VDC 5 V nominal 9 18 VDC 12 V nominal Input Voltage Range 18 36 VDC 24 V nominal 36 75 VDC 48 V nominal Input Filter Capacitor Input Reflected Ripple 35 mA pk-pk Through 12 H inductor and 47 F capacitor 15 VDC for 1000 ms 5 V models 25 VDC for 1000 ms 12 V models Input Surge 50 VDC for 1000 ms 24 V models 100 VDC for 1000 ms 48 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage See Models and Ratings table Initial Set Accuracy 2 % Minimum Load 0 A No minimum load required Line Regulation 0.2 % 1 % Single output Load Regulation 1 (2) % Dual output 5%-100% (0%-100%) On dual output models when one load is varied between Cross Regulation 5 % 25% and 100% and other is fixed at 100% Recovery within 2% in less than 2 ms Transient Response 3 % deviation for a 25% load change Ripple & Noise 50 mV pk-pk 20 MHz bandwidth. Measured using 1 F ceramic capacitor Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency See Models and Ratings table Isolation: Input to Output 1500 VDC Switching Frequency 150 550 kHz Variable 9 Isolation Resistance 10 Isolation Capacitance 70 pF 3 Power Density 11.5 Win Mean Time Between Failure 2.8 MHrs MIL-HDBK-217F, +25 C GB Weight 0.0067 (3.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C Derate from 100% load at +85 C to no load at +105 C Storage Temperature -55 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2