8/10 Watts xppower.com JCJ Series 2:1 Input Range DIP-24 Metal Package Operating Temperature -40 C to +100 C Single & Dual Outputs Continuous Short Circuit Protection 1500 VDC Isolation 3 Year Warranty Specification Input General Input Voltage Range 12 V (9-18 VDC) Efficiency See tables 24 V (18-36 VDC Isolation 1500 VDC Input to Output 48 V (36-75 VDC) 1000 VDC Input to Case Input Current See table 1000 VDC Output to Case Input Filter Pi network Isolation Capacitance 1200 pF max Input Reflected JCJ08: 35 mA, JCJ10: 20 mA Switching Frequency 330 kHz typical 3 Ripple Current pk-pk through 12 H inductor Power Density JCJ10: 25 W/in 3 Input Surge 12 V models 24/25 VDC for 100 ms JCJ08: 20 W/in 24 V models 40/50 VDC for 100 ms MTBF > 900 KHrs to MIL-HDBK-217F 48 V models 100 VDC for 100 ms at 25 C, GB Undervoltage Lockout None Reverse Voltage None Environmental Protection Operating Temperature -40 C to +100 C, derate from 100% load at +60 C to no load at +100 C Output Case Temperature +100 C max Output Voltage See table Storage Temperature -40 C to +125 C Output Voltage Balance 1% max, dual output models Humidity Up to 95% RH, non-condensing Minimum Load No minimum load required Cooling Natural convection Initial Set Accuracy 1% max Line Regulation 0.5% max EMC Load Regulation 0.7% for 2.5-3.3 V models, 0.5% for all Emissions EN55022 Class A conducted other models (see note 2) & radiated with external components, Cross Regulation 5% on dual output models (see note 3) see application note Transient Response <3% max deviation, recovery to within 1% ESD Immunity EN61000-4-2, 8 kV air discharge, in 200 s for a 25% load change 4 kV contact discharge Ripple & Noise 75 mV pk-pk, 20 MHz bandwidth, JCJ10: 6 kV contact discharge, (see note 4) Perf Criteria A Overvoltage Protection JCJ10: 3.3 V models: 3.9 V typ., EFT/Burst EN61000-4-4, level 1 5 V models: 6.2 V typ., JCJ10: level 3, Perf Criteria A, (see note 5) 12 V models: 15.0 V typ., Surge JCJ08: EN61000-4-5, installation class 2, 15 V models: 18.0 V typ., JCJ10: installation class 3, 12 V models: 15.0 V typ., Perf Criteria A, (see note 5) 15 V models: 18.0 V typ. Conducted Immunity EN61000-4-6, 3 Vrms JCJ08: No OVP JCJ10: 10 Vrms, Perf Criteria A Overload Protection >150% of full load Magnetic Field EN61000-4-8, 1 A/m Perf Criteria A Short Circuit Protection Trip & restart (hiccup) with auto recovery Maximum Capacitive See tables Safety Load Temperature 0.02/C max Safety Approvals UL60950-1, CAN/CSA C22.2 No.60950-1, Coefficient UL62368-1 DC-DCDC-DC JCJ08/10 Models and Ratings (1) Input Current Maximum Input Voltage Output Voltage Output Current Efficiency Model Number No Load Full Load Capacitive Load 3.3 V 2.000 A 20 mA 0.69 A 3300 F 80% JCJ0812S3V3 5.0 V 1.500 A 20 mA 0.76 A 2200 F 82% JCJ0812S05 12.0 V 0.665 A 20 mA 0.78 A 470 F 85% JCJ0812S12 9-18 V 15.0 V 0.535 A 20 mA 0.80 A 220 F 83% JCJ0812S15 5.0 V 0.800 A 20 mA 0.81 A 1000 F 82% JCJ0812D05 12.0 V 0.335 A 20 mA 0.79 A 220 F 84% JCJ0812D12 15.0 V 0.265 A 20 mA 0.79 A 100 F 84% JCJ0812D15 3.3 V 2.000 A 15 mA 0.34 A 3300 F 80% JCJ0824S3V3 5.0 V 1.500 A 15 mA 0.38 A 2200 F 82% JCJ0824S05 12.0 V 0.665 A 15 mA 0.39 A 470 F 85% JCJ0824S12 18-36 V 15.0 V 0.535 A 15 mA 0.40 A 220 F 84% JCJ0824S15 5.0 V 0.800 A 15 mA 0.41 A 1000 F 82% JCJ0824D05 12.0 V 0.335 A 15 mA 0.40 A 220 F 83% JCJ0824D12 15.0 V 0.265 A 15 mA 0.39 A 100 F 85% JCJ0824D15 3.3 V 2.000 A 15 mA 0.17 A 3300 F 80% JCJ0848S3V3 5.0 V 1.500 A 15 mA 0.19 A 2200 F 82% JCJ0848S05 12.0 V 0.665 A 15 mA 0.20 A 470 F 84% JCJ0848S12 36-75 V 15.0 V 0.535 A 15 mA 0.20 A 220 F 84% JCJ0848S15 5.0 V 0.800 A 15 mA 0.20 A 1000 F 82% JCJ0848D05 12.0 V 0.335 A 15 mA 0.20 A 220 F 85% JCJ0848D12 15.0 V 0.265 A 15 mA 0.20 A 100 F 85% JCJ0848D15 2.5 V 3.000 A 10 mA 0.79 A 2200 F 81% JCJ1012S2V5 3.3 V 3.000 A 10 mA 1.01 A 2200 F 84% JCJ1012S3V3 5.0 V 2.000 A 10 mA 0.99 A 2200 F 86% JCJ1012S05 9-18 V 12.0 V 0.833 A 10 mA 0.98 A 820 F 87% JCJ1012S12 15.0 V 0.667 A 10 mA 0.96 A 470 F 89% JCJ1012S15 12.0 V 0.416 A 10 mA 0.98 A 220 F 87% JCJ1012D12 15.0 V 0.333 A 10 mA 0.97 A 150 F 88% JCJ1012D15 2.5 V 3.000 A 10 mA 0.38 A 2200 F 84% JCJ1024S2V5 3.3 V 3.000 A 10 mA 0.50 A 2200 F 85% JCJ1024S3V3 5.0 V 2.000 A 10 mA 0.48 A 2200 F 89% JCJ1024S05 18-36 V 12.0 V 0.833 A 10 mA 0.49 A 820 F 88% JCJ1024S12 15.0 V 0.667 A 10 mA 0.49 A 470 F 88% JCJ1024S15 12.0 V 0.416 A 10 mA 0.49 A 220 F 88% JCJ1024D12 15.0 V 0.333 A 10 mA 0.47 A 150 F 90% JCJ1024D15 2.5 V 3.000 A 10 mA 0.19 A 2200 F 84% JCJ1048S2V5 3.3 V 3.000 A 10 mA 0.25 A 2200 F 85% JCJ1048S3V3 5.0 V 2.000 A 10 mA 0.24 A 2200 F 88% JCJ1048S05 36-75 V 12.0 V 0.833 A 10 mA 0.25 A 820 F 87% JCJ1048S12 15.0 V 0.667 A 10 mA 0.24 A 470 F 88% JCJ1048S15 12.0 V 0.416 A 10 mA 0.25 A 220 F 87% JCJ1048D12 15.0 V 0.333 A 10 mA 0.25 A 150 F 87% JCJ1048D15 Notes 1. Input current measured at nominal input voltage. 4. Measured with 20 MHz bandwidth and 1 F ceramic capacitor 2. From 10% to 100% load. across output rails. 3. When one output is set at 100% load and the other varied between 25% 5. A 220 F/100 V capacitor across the input is required to meet EN61000-4-4 and 100% load and EN61000-4-5 Mechanical Details and Application Note 0 1.25 0.90 0 Pin Connections (31.75) (22.86) Pin Single Dual Pin Single Dual 2 3 911 2 -Vin -Vin 14 +Vout +Vout 1 Pin diameter: 0.02 0.002 (0.5 0.05) DIA 0.40 (10.16) 3 -Vin -Vin 16 -Vout Common 0 0.80 0.600 2 Pin pitch tolerance: 0.014 (0.35) 0.02 Bottom View (20.32) (15.24) (0.50) 3 Case Tolerance: 0.02 (0.5) 9 No Pin Common 22 +Vin +Vin 4 Package: 24 Pin DIL nickel-coated copper 0.12 (3.05) Min. 23 22 16 14 11 N.C. -Vout 23 +Vin +Vin 0.20 0.10 Notes (5.08) (2.54) 1. All dimensions are in inches (mm) Input Filter 2. Weight: 0.04 lbs (17 g) approx. N 3. Pin pitch and length tolerance: 0.014 (0.35) + +Vin +Vout 0 4. Pin diameter tolerance: 0.02 0.002 (0.5 0.05) 12 H 5. Case tolerance: 0.02 (0.5) 6. Package: 24 in DIL nickel-coated copper. DC/DC 100 F LOAD Converter - -Vin -Vout 27 Nov 17