40 Watts xppower.com JCP Series 2:1 Input Range Single, Dual & Triple Outputs -40 C to +100 C Operating Temperature High Efficiency up to 92% Six-sided Metal Case Fixed 350 kHz Switching Frequency 3 Year Warranty Input General Input Voltage Range 12 VDC (9-18 VDC) Efficiency See table 24 VDC (18-36 VDC) Isolation Voltage 1500 VDC Input to Output 48 VDC (36-75 VDC) 1500 VDC Input to Case Input Current See table Output return connected to case Input Filter Pi network Switching Frequency 350 kHz typical Undervoltage Lockout Turn on >71% nominal input MTBF >600 kHrs to MIL-HDBK-217F, Turn off <67% nominal input GB at 25 C 9 Isolation Resistance 10 min Output Environmental Output Voltage See table Output Voltage Trim 10% Operating Temperature -40 C to +100 C, derate from 100% load at +60 C to 0% load at +100 C Minimum Load See table Line Regulation 0.5% max for single & dual output, Case Temperature +100 C max 1.0% max for V1 of triple output, Storage Temperature -55 C to +125 C 3.0% for aux of triple output Cooling Convection-cooled Load Regulation 0.5% max single 1.0% dual output, Operating Humidity Up to 90%, non-condensing 1.0% max for V1 of triple output, Shock 30 g, half sine wave 18 ms pulse applied 4.0% for aux of triple output 3 times on each of 6 axes Setpoint Accuracy 1.5% max single and dual Vibration 5-500 Hz, 3 g, for 10 mins on each 1.5% max for V1, 3.0% of triple output of 3 axes Voltage Balance 2.0% max Ripple & Noise 2.5, 3.3 & 5.0 V models 50 mV pk-pk max EMC & Safety 12.0 & 15.0 V models 75 mV pk-pk max (20 MHz bandwidth) Emissions EN55022 Level A conducted & radiated with external components - contact Transient Response 5% max deviation, recovery to within technical sales 1% in 300 s for a 25% load change Temperature 0.02%/C ESD Immunity EN61000-4-2, Level 2 Perf Criteria A Coefficient Radiated Immunity EN61000-4-3, 3 V/m Perf Criteria A Overvoltage Protection 2.5 V models 3.6 V typical, Conducted Immunity EN61000-4-6, 3 V rms Perf Criteria A 3.3 V models 3.9 V typical, 5.0 V models 6.2 V typical, 12.0 V models 15.0 V typical, 15.0 V models 18.0 V typical Overcurrent Protection 110-140% Short Circuit Protection Continuous, trip & restart (Hiccup mode) Remote On/Off ON >3.5 to 75 VDC or open circuit OFF <1.8 VDC Thermal Protection Shuts down when case temperature measures +110 C typical Remote Sense Compensates for up to 10% voltage drop single output models only DC-DCDC-DC JCP Models and Ratings (2) Output Current Input Current Input Output Model Efficiency (1) Voltage Voltage Number Min Max No Load Full Load 2.5 V 0 A 10.00 A 200 mA 2367 mA 88% JCP4012S2V5 3.3 V 0 A 10.00 A 200 mA 3090 mA 89% JCP4012S3V3 5.0 V 0 A 8.80 A 200 mA 3745 mA 89% JCP4012S05 12.0 V 0 A 3.33 A 200 mA 3703 mA 90% JCP4012S12 15.0 V 0 A 2.66 A 200 mA 3702 mA 90% JCP4012S15 9-18 V 12.0 V 0.09 A 1.80 A 100 mA 4045 mA 89% JCP4012D12 15.0 V 0.07 A 1.40 A 100 mA 3889 mA 90% JCP4012D15 3.3 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 200 mA 2784 mA 88% JCP4012T0312 3.3 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 200 mA 2727 mA 88% JCP4012T0315 5.0 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 200 mA 3750 mA 88% JCP4012T0512 5.0 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 200 mA 3611 mA 90% JCP4012T0515 2.5 V 0 A 10.00 A 100 mA 1184 mA 88% JCP4024S2V5 3.3 V 0 A 10.00 A 100 mA 1545 mA 89% JCP4024S3V3 5.0 V 0 A 8.80 A 110 mA 1831 mA 91% JCP4024S05 12.0 V 0 A 3.33 A 100 mA 1811 mA 92% JCP4024S12 15.0 V 0 A 2.66 A 100 mA 1810 mA 92% JCP4024S15 18-36 V 12.0 V 0.09 A 1.80 A 100 mA 1978 mA 91% JCP4024D12 15.0 V 0.07 A 1.40 A 100 mA 1902 mA 92% JCP4024D15 3.3 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 100 mA 1361 mA 90% JCP4024T0312 3.3 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 100 mA 1333 mA 90% JCP4024T0315 5.0 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 100 mA 1833 mA 90% JCP4024T0512 5.0 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 100 mA 1806 mA 90% JCP4024T0515 2.5 V 0 A 10.00 A 50 mA 585 mA 89% JCP4048S2V5 3.3 V 0 A 10.00 A 50 mA 764 mA 90% JCP4048S3V3 5.0 V 0 A 8.80 A 60 mA 926 mA 90% JCP4048S05 12.0 V 0 A 3.33 A 60 mA 916 mA 91% JCP4048S12 15.0 V 0 A 2.66 A 60 mA 906 mA 92% JCP4048S15 36-75 V 12.0 V 0.09 A 1.80 A 50 mA 1000 mA 90% JCP4048D12 15.0 V 0.07 A 1.40 A 50 mA 962 mA 91% JCP4048D15 3.3 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 50 mA 688 mA 89% JCP4048T0312 3.3 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 50 mA 690 mA 87% JCP4048T0315 5.0 V/12.0 V 0.60 A/0.04 A 6.00 A/0.40 A 50 mA 938 mA 88% JCP4048T0512 5.0 V/15.0 V 0.60 A/0.03 A 6.00 A/0.30 A 50 mA 903 mA 90% JCP4048T0515 Notes 1. Add suffix -N to model number for negative logic Remote On/Off. 2. Input current measured at nominal input voltage. Mechanical Details 2.0 (50.8) All dimensions are in inches (mm), Tolerance: 0.02 (0.5) 1.10 (27.9) Weight: 65 g (0.14 lbs) 0.20 (5.1) 0.40 (10.2) 0.40 (10.2) PIN CONNECTIONS 3 2 1 Pin Single Dual Triple 1 +V Input +V Input +V Input 2 -V Input -V Input -V Input 3 On/Off On/Off On/Off BOTTOM 4 NC No Pin +Aux. Output VIEW 5 -Sense +V Output 1 Rtn 6 +Sense Rtn -Aux. Output 7 +Vout Rtn +V Output 1 9 8 7 6 5 4 8 Rtn -V Output 2 Rtn 0.10 (2.5) 9 Trim Trim NC 0.22 (5.6) 0.30 (7.6) 0.60 (15.2) 0.20 (5.1) 0.80 (20.3) 0.50 (12.7) Application Notes Derating Curve Remote On/Off Control Remote Sense -2.5%/C Standard ROF logic is positive. If remote sense is not being used: 100 Output On >3.5 to 75 VDC or open circuit +Sense should be connected to +Vout Output Off <1.8 VDC 80 -Sense should be connected to Rtn. Optional ROF logic is negative (-N version). 60 Output On <1.8 VDC 40 Output Off >3.5 to 75 VDC or open circuit 20 0 -40 -20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C), Natural convection, 20 ft/min (0.1 m/s) Maximum case temperature 100 C 29 Sept 2021 Load (%) 2.0 (50.8) 1.80 (45.7) DIA. 0.040.002 (1.00.05)