JHL0312D12 XP Power

DC-DC Converter JHL03 Series 3 Watts International Medical Approvals xxx Series 4000 VAC Reinforced Insulation Meets IEC60601-1, 3rd Edition 2 MOPP Isolation at 250 VAC 2 A Patient Leakage Current DIP24 Package EN55011 Level A With No External Components 3 Year Warranty Dimensions: JHL03: 1.25 x 0.80 x 0.40 (31.15 x 20.32 x 10.20 mm) Models & Ratings Input Current Maximum (4) Input Voltage Output Voltage Output Current Efficiency Model Number (3) (1) (2) Capacitive Load No Load Full Load 5.0 V 600 mA 56 mA 325 mA 720 F 76% JHL0312S05 12.0 V 250 mA 72 mA 316 mA 300 F 78% JHL0312S12 10-17 V 15.0 V 200 mA 67 mA 315 mA 240 F 78% JHL0312S15 12.0 V 125 mA 43 mA 304 mA 140 F 81% JHL0312D12 15.0 V 100 mA 56 mA 303 mA 120 F 80% JHL0312D15 5.0 V 600 mA 38 mA 167 mA 720 F 74% JHL0324S05 12.0 V 250 mA 37 mA 165 mA 300 F 78% JHL0324S12 20-30 V 15.0 V 200 mA 23 mA 146 mA 240 F 82% JHL0324S15 12.0 V 125 mA 29 mA 150 mA 140 F 80% JHL0324D12 15.0 V 100 mA 42 mA 166 mA 120 F 80% JHL0324D15 Notes 1. Input current measured at nominal input voltage. 3. Maximum capacitive load is per output. 2. Input current measured at lowest input voltage. 4. Typical values. Mechanical Details Pin Connections 1.25 0.10 0.20 (31.75) (2.54) Pin Single Dual (5.08) 2 -Vin -Vin 14 16 22 23 3 -Vin -Vin 9 No Pin Common 0.80 0.60 Bottom View (20.32) (15.24) 10 Trim Trim 11 No Pin -Vout 11 10 9 3 2 14 +Vout +Vout 16 -Vout Common 0.90 0.18 22 +Vin +Vin (22.86) (4.57) 23 +Vin +Vin Notes Notes: 1. All dimensions are in inches (mm) 1. Pin diameter: 0.02 0.002 (0.5 0.05) 0.40 (10.20) 2. Pin pitch tolerance: 0.014 (0.35) 2. Weight: 0.04 lbs (20 g) approx. 3. Case Tolerance: 0.02 (0.5) 3. Pin diameter: 0.02 0.002 (0.5 0.05) 4. Pin pitch tolerance: 0.014 (0.35) 0.12 (3.05) Min. 5. Case tolerance: 0.02 (0.5) www.xppower.com 1 DC-DC Converter JHL03 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 10 17 VDC 12 V nominal 20 30 VDC 24 V nominal Input Current See Models and Ratings table Inrush Current 25 A At 30 VDC input Input Filter Pi type Patient Leakage Current 2 A On at >8.8 V. Off <8.3 V 12 V models Undervoltage Lockout On at >17.5 V. Off <17.0 V 24 V models 25 VDC 12 V models for 3 s Input Surge 50 VDC 24 V models for 3 s Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 30 V See Models and Ratings table Output Voltage Trim 10 % Via external resistors, see Application Notes 1 % on V1 Initial Set Accuracy 2 % on V2 of dual output models Minimum Load 0A No minimum load required Start Up Delay 5 ms Start Up Rise Time 2 ms Line Regulation 0.3 % Load Regulation 1 % 0 - 100% load On dual output models with one output set to 50% load and Cross Regulation 4 % the other varied from 10% to 100% load (D05 20% to 100%) Recovery to within 1% in <500 s for a 50% load change Transient Response 4 % deviation at 0.25 A/s rate Ripple & Noise 1 % pk-pk 20 MHz bandwidth Short Circuit Protection Trip & Restart (hiccup mode), auto recovery Overload Protection 120 200 % Trip & Restart (hiccup mode) Overvoltage Protection 115 140 % Temperature Coefficient 0.03 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See Models and Ratings table For 1 min. Double/reinforced with a working voltage of 250 Isolation 4000 VAC VAC. Meets 2 x MOPP per 3rd edition of IEC60601-1 5000 VAC for 10 ms in accordance with IEC60664-1 Patient Leakage Current 2 A Input to Output Capacitance 20 pF Switching Frequency 250 kHz 3 Power Density 7.5 W/in Mean Time Between Failure >1 MHrs MIL-HDBK-217F, +25 C GB Weight 0.04 (20.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -20 +80 C See derating curve Storage Temperature -40 +100 C Case Temperature +100 C Humidity 5 90 %RH Non-condensing Cooling Natural convection Shock 3 shocks in each plane, total 18 shocks of 30 g : 11 ms halfsine. Conforms to EN60068-2-27 & EN60068-2-47 Vibration 10-500 Hz at 2 g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6 www.xppower.com 2