JSE0812S15 XP Power

DC-DC Converter XPPower JSE08 Series 8 Watts Regulated Single & Dual Output xxx Series 2:1 Input Range DIP16 Package 1500 VDC Isolation Operating Temperature -40 C to +105 C ITE Safety Approvals High Power Density Metal Case 3 Year Warranty Dimensions: JSE08: 0.94 x 0.54 x 0.31 (23.8 x 13.7 x 8.0 mm) Models & Ratings (1) Input current Maximum Input voltage Output voltage Output current Efficiency Model number (2) No load Full load capacitive load 3V3 1600 mA 565 mA 680 F 78% JSE0812S3V3 5 V 1600 mA 825 mA 680 F 81% JSE0812S05 12 V 665 mA 790 mA 330 F 84% JSE0812S12 9-18V 15 V 535 mA 10 mA 795 mA 330 F 84% JSE0812S15 24 V 335 mA 790 mA 150 F 85% JSE0812S24 12 V 335 mA 790 mA 150 F 85% JSE0812D12 15 V 265 mA 790 mA 150 F 84% JSE0812D15 3V3 1600 mA 280 mA 680 F 78% JSE0824S3V3 5 V 1600 mA 405 mA 680 F 82% JSE0824S05 12 V 665 mA 390 mA 330 F 85% JSE0824S12 18-36V 15 V 535 mA 10 mA 395 mA 330 F 85% JSE0824S15 24 V 335 mA 390 mA 150 F 86% JSE0824S24 12 V 335 mA 395 mA 150 F 85% JSE0824D12 15 V 265 mA 385 mA 150 F 86% JSE0824D15 3V3 1600 mA 140 mA 680 F 78% JSE0848S3V3 5 V 1600 mA 205 mA 680 F 81% JSE0848S05 12 V 665 mA 195 mA 330 F 85% JSE0848S12 36-75V 15 V 535 mA 8 mA 195 mA 330 F 85% JSE0848S15 24 V 335 mA 195 mA 150 F 86% JSE0848S24 12 V 335 mA 195 mA 150 F 86% JSE0848D12 15 V 265 mA 195 mA 150 F 86% JSE0848D15 Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. Mechanical Details Pin Connections 178 Pin Single Dual 1 -Vin -Vin Bottom View 0.15 7 No Connection No Connection (3.8) 16 10 9 8 No Connection Common 0.02 (0.5) 9 +Vout +Vout 10 -Vout -Vout 0.60 (15.24) 0.12 (3.0) 0.10 16 +Vin +Vin (2.54) 0.94 (23.8) www.xppower.com 1 1.77 0.07 0.40 (10.16) 0.54 (13.7) 0.31 (8.0)DC-DC Converter XPPower JSE08 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 9.0 18 VDC 12 V nominal Input Voltage Range 18.0 36 VDC 24 V nominal 36.0 75 VDC 48 V nominal Input Filter Internal Pi type ON at >9V, OFF at <8 V 12 V models Undervoltage Lockout ON at >18V, OFF at <16 V 24 V models ON at >36V, OFF at <34 V 48 V models 25 12 V models Input Surge 50 VDC for 1 s 24 V models 100 48 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Initial Set Accuracy 2.0 % At full load Output Voltage Balance 1.0 2.0 % For dual output with balanced laods Minimum Load A No minimum load required Line Regulation 0.2 0.8 % From minimum to maximum input at full load Load Regulation 0.5 1.0 % From 0 to full load On dual output models when one load is varied between Cross Regulation 5.0 % 25% and 100% and other is fixed at 100% Recovery within 1% in less than 250 s for a 25% load Transient Response 3 5 % deviation change. 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 55 mV pk-pk capacitor. Overload Protection 150 % Short Circuit Protection Continuous Trip & Restart (Hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 85 % See Models and Ratings table Isolation: Input to Output 1500/1800 VDC 60 s/1 s Functional 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 500 pF Switching Frequency 370 kHz 3 Power Density 50.8 W/in Mean Time Between Failure 1 MHrs MIL-HDBK-217F, +25 C GB Weight 0.013 (6.1) lb (g) Pin Material Tinned Copper Lead Free Solder Process 260 C max lead temperature 1.5mm from case for 10s Case Flammability UL 94V-0 Rated Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C See Derating Curve. Storage Temperature -50 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55022 Class A No filter required www.xppower.com 2