6 Watts xppower.com JTE Series 4:1 Input Range DIP-24 Plastic Case Operating Temperature -40 C to +100 C Single & Dual Outputs Optional Metal Case 1500 VDC Isolation, 3000 VDC Option 3 Year Warranty Specification Input General Input Voltage Range 24 V (9-36 VDC) Efficiency See table 48 V (18-75 VDC) Isolation Voltage 1500 VDC Input to Output, for optional Input Current See table high isolation version 3000 VDC input to output add suffix -H to model number Input Filter Pi network 1000 VDC Input to Case Input Reflected Ripple 20 mA pk-pk through 12 H inductor 1000 VDC Output to Case and 4.7 F capacitor Isolation Capacitance 1000 pF typical input to output Input Surge 24 V models 50 VDC for 100 ms 9 Isolation Resistance 10 48 V models 100 VDC for 100 ms Switching Frequency 330 kHz typical Under Voltage Lockout 24 V models on >8.5 V, off <8.0 V 3 Power Density 15 W/in 48 V models on >16.5 V, off <15.5 V MTBF >800 kHrs to MIL-HDBK-217F at 25 C, GB Output Environmental Output Voltage See table Output Voltage Balance 2% max, dual output models Operating Temperature -40 C to +100 C, derate from 100% load Initial Set Accuracy 2% max at +60 C to no load at +100 C Minimum Load No minimum load required Case Temperature +100 C max Line Regulation 0.5% max Storage Temperature -55 C to +125 C Load Regulation 1.2% max for single output and Cooling Natural convection 5% max for dual output from 10-100% Operating Humidity Up to 95%, non-condensing Cross Regulation 5% max on dual output models (see note 4) EMC Start Up Delay 20 ms typical Ripple & Noise 80 mV pk-pk (100 mV for D24 models), Emissions EN55032 class A conducted 20 MHz bandwidth (see note 5) ESD Immunity EN61000-4-2, Level 3 Transient Response <3% max deviation, recovery to within 1% 8 kV air discharge Perf Criteria B, in 300 s for a 25% load change (4% 6 kV contact discharge Perf Criteria B max. deviation for S3V3 models) Radiated immunity EN61000-4-3, 10 V/m, Perf Criteria A Overload Protection 135% - 185% of Full Load EFT/Burst EN61000-4-4, level 3, Perf Criteria A* Short Circuit Protection Trip & restart (Hiccup mode), Surge EN61000-4-5, level 2, Perf Criteria A* auto recovery Conducted Immunity EN61000-4-6, 10 Vrms, Perf Criteria A Maximum Capacitive See table Magnetic Fields EN61000-4-8, 1 A/m, Perf Criteria A Load Temperature 0.02/C max Coefficient Safety Safety Approvals UL62368-1, CAN/CSA C22.2 No. 62368-1, CE & UKCA meets all applicable directives & legislation. * External input capacitor required, 220F/100V DC-DCDC-DC JTE06 Models and Ratings (2) Input Current Maximum (1,6) Input Voltage Output Voltage Output Current Efficiency Model Number (3) No Load Full Load Capacitive Load 3.3 V 1400 mA 10 mA 257 mA 470 F 76% JTE0624S3V3 5.0 V 1200 mA 10 mA 316 mA 470 F 80% JTE0624S05 12.0 V 500 mA 10 mA 301 mA 100 F 84% JTE0624S12 15.0 V 400 mA 10 mA 301 mA 100 F 84% JTE0624S15 24.0 V 250 mA 10 mA 301 mA 47 F 84% JTE0624S24 9-36 V 3.3 V 909 mA 10 mA 324 mA 220 F 78% JTE0624D03 5.0 V 600 mA 10 mA 308 mA 220 F 82% JTE0624D05 12.0 V 250 mA 10 mA 301 mA 100 F 84% JTE0624D12 15.0 V 200 mA 15 mA 301 mA 100 F 84% JTE0624D15 24.0 V 125 mA 20 mA 308 mA 47 F 82% JTE0624D24 3.3 V 1400 mA 7 mA 128 mA 470 F 76% JTE0648S3V3 5.0 V 1200 mA 7 mA 154 mA 470 F 82% JTE0648S05 12.0 V 500 mA 7 mA 151 mA 100 F 84% JTE0648S12 15.0 V 400 mA 7 mA 151 mA 100 F 84% JTE0648S15 24.0 V 250 mA 7 mA 151 mA 47 F 84% JTE0648S24 18-75 V 3.3 V 909 mA 7 mA 162 mA 220 F 78% JTE0648D03 5.0 V 600 mA 7 mA 154 mA 220 F 82% JTE0648D05 12.0 V 250 mA 7 mA 151 mA 100 F 84% JTE0648D12 15.0 V 200 mA 7 mA 151 mA 100 F 84% JTE0648D15 24.0 V 125 mA 10 mA 158 mA 47 F 80% JTE0648D24 Notes 1. For optional 3000 VDC isolation add suffix -H to model number. 5. Ripple & Noise measured with 1F ceramic capacitor across output pins. 2. Input current measured at nominal input voltage. 6. For optional metal case version, add suffix -M to part number e.g. 3. Maximum capacitive load is per output. JTE0624S12-M. 4. Cross regulation for duals is 5% when one output is at 100% and the other is varied between 25% and 100%. Mechanical Details Plastic Case Optional Metal Case DIA 1.25 0.90 0.02 1.25 (31.75) (22.86) Printed Face (0.50) (31.75) 23 911 0.40 (10.40) 0.80 0.60 0.80 Bottom View (20.32) (15.24) (20.32) 23 22 16 14 0.12 (3.05) 0.10 0.20 Printed Face (2.54) (5.08) 0.90 (22.86) 0.02 (0.50) 2 3 9 11 Pin Single Dual 0.40 (10.40) 2 -Vin -Vin 0.60 Bottom View 3 -Vin -Vin (15.24) 9 No Pin Common 0.12 (3.05) Min. 23 22 16 14 11 N.C. -Vout 14 +Vout +Vout 0.02 0.20 16 -Vout Common (0.50) (5.08) 22 +Vin +Vin 23 +Vin +Vin Notes 1. All dimensions are in inches (mm) 4. Pin pitch tolerance: 0.014 (0.35) 2. Weight: 0.04 lbs (17 g) approx. 5. Case tolerance: 0.02 (0.5) 3. Pin diameter: 0.02 0.002 (0.5 0.005) Application Note Derating Curve 100 80 60 40 20 0 -40 -20 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C) 29 Sept 2021 Load (%)