JWL5048S24 XP Power

DC-DC Converter XPPower JWL50 Series 50 Watts Regulated Single Output xxx Series Wide 4:1 Input Range 2 x 1 Package 1.5kVDC Input to Output Isolation Operating Temperature -40C to +105C Full Power to +69C ITE Safety Approvals Remote On/Off and Output Trim High Power Density Dimensions: Optional Heatsink JWL50: 6-Sided Metal Case 2.00 x 1.00 x 0.43 (50.8 x 25.4 x 11.0 mm) 3 Year Warranty The JWL50 series offers high efficiency power conversion in a compact, industry standard format. Features include remote on/off, trim function and over temperature protection. Models & Ratings (1,2) Input current Overvoltage Maximum (4) Input voltage Output voltage Output current Efficiency Model number (3) No load Full load Protection capacitive load 3V3 10.00 A 80 mA 1.53 A 3.9 V 26000 F 90% JWL5024S3V3 5 V 10.00 A 60 mA 2.29 A 6.2 V 17000 F 91% JWL5024S05 24V 12 V 4.17 A 80 mA 2.27 A 15.0 V 3000 F 92% JWL5024S12 (9-36V) 15 V 3.33 A 80 mA 2.26 A 18.0 V 2000 F 92% JWL5024S15 24 V 2.08 A 80 mA 2.29 A 30 V 750 F 91% JWL5024S24 3V3 10.00 A 40 mA 0.76 A 3.9 V 26000 F 90% JWL5048S3V3 5 V 10.00 A 30 mA 1.15 A 6.2 V 17000 F 91% JWL5048S05 24V 12 V 4.17 A 60 mA 1.13 A 15.0 V 3000 F 92% JWL5048S12 (18-75V) 15 V 3.33 A 60 mA 1.13 A 18.0 V 2000 F 92% JWL5048S15 24 V 2.08 A 50 mA 1.14 A 30 V 750 F 91% JWL5048S24 Notes 1. Input currents measured at nominal input voltage. 3. Add suffix -HK for optional heatsink. 2. Input current is typically 2.5 mA at nominal input voltage when output is turned off using remote on/off. Mechanical Details Optional Heatsink (-HK) Pin Connections 0.40 0.20 0.20 (10.16) (5.08) (5.08) Pin Single 3 2 1 1 +Vin 2 -Vin 3 Remote On/Off 4 +Vout Bottom View 5 -Vout 6 Trim 0.07 0.71 max Notes (1.85) 6 54 1.22 (31.0) Max (18.0) max 1. All dimensions are in inches (mm) Heat-sink 0.22 0.43 2. Weight: 0.074 lbs (34.0g) approx. Thermal pad (5.5) (11.0) 0.40 0.40 0.10 3. Tolerance: X.XX0.01 (X.X0.25) (10.16) (10.16) (2.54) Clamp 1.00 (25.4) Converter X.XXX0.005 (X.XX0.13) 4. Pin Tolerance: 0.002 (0.05) www.xppower.com 1 0.14 (3.6) 1.80 (45.72) 2.00 (50.8) 0.04 (1.00) 1.22 (31.1)DC-DC Converter XPPower JWL50 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 9 36 VDC 24 V nominal Input Voltage Range 18 75 VDC 48 V nominal Input Filter Internal Pi type 50 24 V models Input Surge VDC for 1 s 100 48 V models ON: Logic high (3.5-12 V) or open circuit Remote On/Off OFF: Logic low (<1.2 V) or short pin 2 to pin 3 Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 24 VDC See Models and Ratings table Initial Set Accuracy 1.0 % At full load Output Trim 10 % See Application Notes Minimum Load 0 A No minimum load required Line Regulation 0.5 % From minimum to maximum input at full load Load Regulation 0.5 % From 0 to full load Recovery within 1% in less than 250 s for a 25% load Transient Response 3 5 % deviation change. 3.3 & 5V output / other models. 20 MHz bandwidth. Ripple & Noise 100/150 mV pk-pk Measured using 1 F MLCC & 10F tantalum capacitor. Overload Protection 150 % Short Circuit Protection Continuous trip & restart (hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 90 % See Models and Ratings table Isolation: Input to Output 1500 VDC 60 s functional 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 2200 pF Switching Frequency 285 kHz 3 Power Density 58 W/in Mean Time Between Failure 230 kHrs MIL-HDBK-217F, +25 C GB Case Material Black anodised aluminium with plastic base UL94V-0 rated Potting Material Epoxy UL94V-0 rated Pin Material Gold plated with copper alloy and nickel base Solder Profile Max 260 C 1.5mm from case 10s Weight 0.074 (34.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C See Derating Curve. Storage Temperature -50 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection Thermal impedance to air 12.1/9.8 C/W No heatsink / with heatsink Altitude 6000 m Operating. Storage to 10,000m EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class A See Application Notes www.xppower.com 2