LCW150 Series AC-DC POWER SUPPLIES CONVECTION 150W COOLED The LCW series of regulated output convection cooled AC-DC power supplies are designed to provide a cost eectivff e solution for industrial electronics, technology and household applications. Features include wide range AC input from 85-305VAC, active PFC, output voltage adjustment, a power ON LED, low stand-by power consumption, output short circuit protection, over current and over voltage protection. Applications include auxiliary power sources, security installations, lighting control, smart home or office control systems, ticketing and vending applications. Features 150W convection cooled Applications Active PFC Integrated connector cover ITE, industrial & household approvals Household Industrial Instrumentation Appliances Electronics Class B conducted & radiated emissions Input voltage range 85-305VAC Regulated single outputs from 12 to 48VDC Robotics Technology Output voltage trim Remote On/Off Dimensions Efficiency to 88% 7.05 x 3.89 x 1.18 (179.0 x 99.0 x 30.0 mm) Short circuit, overvoltage & overload protection Conformal coating option -30C to +70C operating temperature 3 year warranty Models & Ratings Output Voltage Ripple & Noise Maximum (3) (2) Model Number Output Current Efficiency Power (1) (4) pk to pk Capacitive Load Nominal Adjustment Range LCW150PS12 12.0V 10.8 - 13.2V 12.5A 120mV 85% 5000F 150W LCW150PS15 15.0V 13.5 - 16.5V 10.0A 120mV 86% 5000F 150W LCW150PS24 24.0V 21.6 - 26.4V 6.3A 150mV 87% 5000F 150W LCW150PS48 48.0V 45.6 - 55.2V 3.2A 200mV 88% 3000F 150W Notes: 1. Ripple & noise measured with 20MHz bandwidth and 47F electrolytic capacitor in parallel with 0.1F ceramic capacitor. 2. Typical efficiencies measured at 230VAC full load. 3. Add suffix -E to model number to specify conformal coating option, MOQ applies, please contact sales. 4. Output power rating must not be exceeded.AC-DC POWER SUPPLIES LCW150 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 85 115/230 305 VAC Derate output power linearly from 100% at 100VAC to 80% at 85VAC Input Voltage - Operating Alternative input. Not to be used in addition to AC input. DC input not 120 430 VDC included in safety approvals, external DC rated fuse required. Derate output power linearly from 100% at 140VDC to 80% at 120VDC Input Frequency 47 50/60 63 Hz 0.99 115VAC at full load Power Factor 0.98 230VAC at full load 2.5 85VAC Input Current - Full Load 2.0 A 115VAC 1.0 230VAC No Load Input Power 0.3 W 30 115VAC cold start at 25C ambient Inrush Current A 45 230VAC cold start at 25C ambient Earth Leakage Current 2.0 mA 277VAC/50Hz (Typ) Input Protection T3.15A/300VAC Internal fuse fitted in line Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 10.8 55.2 VDC See Models & Ratings table 2 LCW150PS12/15 Initial Set Accuracy % Full load 1 LCW150PS24/48 Voltage Adjustment 10 % Minimum Load 0 A No minimum load required Start Up Delay 200 ms 115/230VAC full load Hold Up Time 16 ms 230VAC Line Regulation 0.5 % 100-264VAC, full load Load Regulation 0.5 % 0-100% load Recovery within 1% in less than 5ms for a 50-75% and 75-50% load Transient Response 10 % step Ripple & Noise mV pk-pk See Models & Ratings table Over/Undershoot 10 % Full load 5ms recovery 16.8 LCW150PS12 24.5 LCW150PS15 Overvoltage Protection VDC Output will switch off, cycle supply to restart. 33.6 LCW150PS24 60.0 LCW150PS48 Overload Protection 105 150 % Nominal output current, auto recovery. Constant current mode Temperature Coefficient 0.03 %/C Short Circuit Protection Constant current mode, auto recovery Output is on if +RC pin 1 is floating or at 0V (max. 0.8V) relative to -RC pin 2. Remote On/Off Control If +RC pin 1 is between 4 and 10VDC relative to -RC pin 2 then output is off. See mechanical details. 2