LCW200 Series AC-DC POWER SUPPLIES CONVECTION 200W COOLED The LCW series of regulated output convection cooled AC-DC power supplies are designed to provide a cost eectivff e solution for industrial electronics and technology applications. Features include wide range AC input from 85-305VAC, active PFC, output voltage adjustment, low stand-by power consumption, output short circuit protection, over current and over voltage protection. Applications include auxiliary power sources, security installations, lighting control, smart home or office control systems, ticketing and vending applications. Features Applications 200W convection cooled Active PFC Integrated connector cover Industrial Instrumentation Robotics Technology ITE & industrial approvals Electronics Class B conducted & radiated emissions Input voltage range 85-305VAC Dimensions Regulated single outputs from 5.0V to 48VDC LCW200PS05: 8.46 x 4.53 x 1.18 (215.0 x 115.0 x 30.0mm) All other models: 7.05 x 3.89 x 1.18 (179.0 x 99.0 x 30.0mm) Output voltage trim Efficiency to 90% Short circuit, overvoltage & overload protection Conformal coating option -30C to +70C operating temperature 3 year warranty Models & Ratings Output Voltage Ripple & Noise Maximum (3) (2) Model Number Output Current Efficiency Power (1) (4) pk to pk Capacitive Load Nominal Adjustment Range LCW200PS05 5.0V 4.5 - 5.5V 40.0A 150mV 85% 3000F 200W LCW200PS12 12.0V 11.4 - 12.6V 16.7A 150mV 88% 4000F 200W LCW200PS15 15.0V 14.3 - 15.7V 13.4A 150mV 88% 3300F 200W LCW200PS24 24.0V 22.8 - 25.2V 8.4A 150mV 90% 1500F 200W LCW200PS48 48.0V 45.6 - 50.4V 4.2A 240mV 89% 470F 200W Notes: 1. Ripple & noise measured with 20MHz bandwidth and 47F electrolytic capacitor in parallel with 0.1F ceramic capacitor. 2. Typical efficiencies measured at 230VAC full load. 3. Add suffix -E to model number to specify conformal coating option, MOQ applies, please contact sales. 4. Output power rating must not be exceeded.AC-DC POWER SUPPLIES LCW200 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Derate output power linearly from 100% at 100VAC to 80% at 85VAC. 85 115/230 305 VAC LCW200PS05 derate output power linearly from 100% at 115VAC to 60% at 85VAC Input Voltage - Operating Alternative input. Not to be used in addition to AC input. DC input not included in safety approvals, external DC rated fuse required. Derate 120 430 VDC output power linearly from 100% at 120VDC to 80% at 100VDC. LCW200PS05 derate output power linearly from 100% at 160VDC to 50% at 120VDC Input Frequency 47 50/60 63 Hz 0.98 115VAC at full load Power Factor 0.95 230VAC at full load 2.5 3.0 115VAC Input Current - Full Load A 1.3 2.0 230VAC No Load Input Power 0.5 W 35 115VAC cold start at 25C ambient Inrush Current A 65 230VAC cold start at 25C ambient Earth Leakage Current 2.0 mA 277VAC/50Hz (Typ) Input Protection T6.3A/300VAC Internal fuse fitted in line Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 4.5 50.4 VDC See Models & Ratings table 2 LCW200PS05, full load Initial Set Accuracy % 1 All other models, full load Voltage Adjustment 10 LCW200PS05 max value % 5 All other models Minimum Load 0 A No minimum load required Start Up Delay 250 400 ms 115/230VAC full load 8 LCW200PS05 Hold Up Time ms 115/230VAC 12 All other models Line Regulation 0.5 % 100-264VAC, full load 1 LCW200PS05 Load Regulation % 0-100% load 0.5 All other models Recovery within 1% in less than 5ms for a 50-75% and 75-50% load Transient Response 10 % step Ripple & Noise mV pk-pk See Models & Ratings table Over/Undershoot 10 % Full load 5ms recovery 7.0 LCW200PS05 16.2 LCW200PS12 Overvoltage Protection 21.8 VDC LCW200PS15 Auto recovery, hiccup mode 32.4 LCW200PS24 60.0 LCW200PS48 105 150 LCW200PS05 Nominal output current, auto recovery hiccup Overload Protection % mode 105 200 All other models Temperature Coefficient 0.03 %/C Short Circuit Protection Continuous, hiccup with auto recovery 2