SMH600PS48-EF XP Power

AC-DC Power Supplies SMH600 600 Watts Single and Dual Outputs Up to 900 W Peak Power on Single Output Versions Power Good, Remote On/Off and Remote Sense Connector Options Forced-cooled U-Channel & End-Fan Versions Fit 1U Applications 3 Year Warranty Dimensions: The SMH600 series provide up to 600 W in a low profile (1.6) chassis mount format. Single outputs are available from 3.3 60 VDC and there are three dual output models SMH: 8.00 x 5.00 x 1.60 (203.0 x 127.0 x 40.64 mm) offering combinations from 5V to 24 VDC. The full power rating is available from 90 264 SMH-EF: VAC input in ambient temperatures up to 50 C providing power solutions for global use 9.10 x 5.00 x 1.60 (231.1 x 127.0 x 40.64 mm) without the need for de-rating. All models comply with level B for both conducted and SMH-TF: 8.00 x 5.00 x 2.20 (203.0 x 127.0 x 55.8 mm) radiated emissions. Models & Ratings (3) Output 1 Output 2 (2) Output Model Number Voltage Current Voltage Current 330 W 3.3 VDC 100.00 A SMH600PS03 500 W 5.0 VDC 100.00 A SMH600PS05 600 W 12.0 VDC 50.00 A SMH600PS12 600 W 15.0 VDC 40.00 A SMH600PS15 600 W 18.0 VDC 33.33 A SMH600PS18 600 W 24.0 VDC 25.00 A SMH600PS24 600 W 36.0 VDC 16.60 A SMH600PS36 600 W 48.0 VDC 12.50 A SMH600PS48 600 W 54.0 VDC 11.10 A SMH600PS54 600 W 60.0 VDC 10.00 A SMH600PS60 500 W +5.0 VDC 50.00 A +12.0 V 33.33 A SMH600PD0512 500 W +5.0 VDC 50.00 A +24.0 V 16.67 A SMH600PD0524 600 W +12.0 VDC 33.33 A +24.0 V 16.67 A SMH600PD1224 Notes 1. Add suffix -EF to model number for end fan type, -TF for top fan type. 2. Standard models have screw terminals. For optional Molex input connector add suffix -F-, for optional Molex output connector add suffix -G and for optional Molex input and output connectors add suffix -FG . Molex output terminals are not available on 3V3 and 5V single output versions or 0512 and 0524 dual output versions. For optional IEC320-C14 inlet on end fan types add suffix -K 3. Output peak power of 900 W for 500 s is available on single output models. Summary Characteristic Minimum Typical Maximum Units Notes & Conditions Input Range 90 264 VAC Signals Power Good Efficiency 90 / 89 % Single output / Dual output at 230 V and full load Operating Temperature 0 +70 C Derate at 2.5%/C from +50 C to +70 C Weight 3.53 (1.6) lb (kg) End fan -EF version EMC EN55022 Level B Conducted & Radiated, EN61000-4, EN61000-3 Safety Approvals EN60950-1, UL60950-1, CSA22.2 No.60950-1 www.xppower.com 1AC-DC Power Supplies SMH600 Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage 90 264 VAC Input Frequency 47 63 Hz Input Current 6A 115 VAC (3.0 A at 230 VAC) Inrush Current 70 A 230 VAC (35 A at 115 VAC) Power Factor >0.9 EN61000-3-2 class A Earth Leakage Current <1.0 mA 264 VAC Input Protection T10.0 A/250 V fuse Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 60 VDC See Models and Ratings table V1 (V2 of dual output models will track by same % of Output Voltage Trim 5 % adjustment) Initial Set Accuracy 1 % Minimum Load 1 / 10 % Single / Dual (for regulation) Start Up Delay 2.0 s 115 VAC Start Up Rise Time 40 ms PD1224 model typically 50 ms Hold Up Time 10 13 ms 115 VAC Drift 0.5 % After 20 min warm up Line Regulation 0.5 % Load Regulation 1 / 3 / 5 % Single / Dual V1 / Dual V2 outputs Over/Undershoot 1.5 5% Deviation, recovery to within 1% in 500 s for a 50% Transient Response 5 % load change Measured at 20 MHz BW and 10 F electrolytic Ripple & Noise 1 % pk-pk and 0.1 F ceramic at terminals Overvoltage Protection 130 % V1 recycle AC input to reset Overload Protection 110 140 % Short Circuit Protection - V1 Trip and restart, auto recovery Remote On/Off Applying short circuit between Remote On/Off pin and signal return turns output off. Remote Sense Compensates for 0.5 V max. voltage drop on single output models only. General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 90 / 89 % Single output / Dual output at 230 V and full load 3000 VAC Isolation: Input to Output Input to Ground 1500 VAC Output to Ground 250 VDC Switching Frequency 60 / 28 kHz PFC / PWM 3 Power Density 9.37 W/in For U Channel Versions Signals Power Good Mean Time Between Failure 115 kHrs MIL-HDBK-217F at 25 C GB Weight 3.53 (1.6) lb (kg) End fan -EF version www.xppower.com 2