SVR10S05 XP Power

DC-DC Converter XPPower SVR10 Series 1 Amp xxx Series Output V Wide Input Range to 36V SMD Package High Ef Radiated Emissions Remote On/Off Control Dimensions: SVR10: 0.6 x 0.335 x 0.315 (15.24 x 8.5 x 8.25mm) 3 Year W The SVR10 provides a cost effective switching regulator solution operating from a wide range DC input range with adjustable output voltages from 1.5V to 12V DC. The SVR10 is designed with size and efficiency in mind with features such as low stand by current of less than 1mA with remote on/off control. Applications can include embedded computing, instrumentation and process control systems. Models & Ratings (1) (2) Input Current Efficiency Max. Capacitive Input Voltage Output Voltage Output Current Model Number Load No Load Full Load Vin Min. Vin Max. 4.75-32V 1.5V 1A 1mA 423mA 680F 76% 66% SVR10S1V5 4.75-32V 1.8V 1A 1mA 494mA 680F 79% 69% SVR10S1V8 4.75-32V 2.5V 1A 1mA 663mA 680F 86% 74% SVR10S2V5 6.5-36V 3.3V 1A 0.2mA 609mA 680F 90% 80% SVR10S3V3 8-36V 5.0V 1A 0.2mA 718mA 680F 93% 85% SVR10S05 10-36V 6.5V 1A 0.2mA 741mA 680F 93% 86% SVR10S6V5 13-36V 9.0V 1A 0.2mA 768mA 680F 94% 89% SVR10S09 16-36V 12V 1A 0.2mA 810mA 680F 95% 92% SVR10S12 Notes 1. Input current measured at minimum input voltage. 3. Standard tube quantity 32 pcs. 2. Efficiency measured at full load. 4. Optional tape and reel packaging. Pack size 300pcs. Add suffix -TR Mechanical Details 0.60 0.02 (15.24 0.50) PCB Footprint Top Pin-Out Pin Function Detail 10 7 6 10 7 6 1 +Vin 5 2 +Vin 1 2 3 4 5 1 2 3 4 5 0.016 (0.40) 0.024 (0.60) 3 GND 0.039 (1.00) 0.100 (2.54) 0.100 (2.54) TYP. 4 +Vout TYP. 0.400 (10.16) 0.400 (10.16) 5 +Vout 6 Trim 7 GND See detail 10 Remote On/Off 0.1 0.037 (0.95) Notes 1. All dimensions are in inches (mm) 3. Pin tolerance: 0.004 (0.1) 2. Weight: 0.0037lbs (1.7g) approx. 4. Case tolerance: 0.010 (0.25) www.xppower.com 1 Non Isolated 1.0A Switching Regulator Regulated Single Outputs from 1.5 to 12VDC oltage Adjustment ficiency to 95% Class B Conducted & Short Circuit Protection -40C to +85C Operation MTBF >2MHrs arranty 0.315 (8.00) 0.335 (8.50) 0.325 (8.25) 0.45 0.01 (11.4 0.3) 0.480 (12.20)DC-DC Converter XPPower SVR10 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 4.75 36 VDC See Models and Ratings table. Input Filter Internal capacitor Input Reflected Ripple 20 mA pk-pk Input Surge 45 VDC For max. 100ms. Remote On/Off Module on if pin 10 is open circuit or logic high. See application notes. Standby input current 0.2 1 mA If using remote on/off control. Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 1.5 12 VDC See Models and Ratings table. Trim Range 10 % See Application Notes. Initial Set Accuracy 2.0 4.0/3.0 % 3.3V output or below/others. (At full load). Minimum Load 0 mA No minimum load required. Line Regulation 0.3/0.2 0.4/0.6 % Full load over input voltage range. Up to 2.5V/others. Maximum variation applies to 2.5V output models and Load Regulation 0.8/0.3 1.5/0.6 % below. Transient Response 50 150 mV For 50% load change. Recovery in 200s typically. Ripple & Noise 30 75 mV pk-pk 20 MHz bandwidth. Short Circuit Protection Continuous, with auto recovery. Maximum Capacitive Load See Models and Ratings table. Temperature Coefficient 0.03 %/ C Overload Protection 2.2 A Start-up Time 20 ms General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency % See models and ratings table. Isolation: Input to Output 0 VDC Non isolated. 370 SVR10S1V5, 1V8, 2V5. Switching Frequency 520 kHz SVR1005S3V3, 05, 6V5. 700 SVR10S09, 12. Mean Time Between Failure 2 MHrs MIL-HDBK-217F. Weight 0.0037 (1.7) lb (g) Case Material Non-conductive black plastic UL94V-0, unpotted. Pin Material Solder coated phosphor bronze C5191R-1/2H. Water Wash Not suitable for water washing. Solder Profile IPC/JEDEC J-STD-020D.1. Peak temperature 245C, duration 60s max. over 217C. Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +85 C See derating curves. Storage Temperature -55 +125 C Case Temperature +120 C Humidity 95 %RH Non-condensing. Cooling Natural convection. EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class B See Application Notes Radiated EN55032 Class B www.xppower.com 2