TR05S3V3 XP Power

DC-DC Converter XPPower TR05 Series 0.5 Amp 0.5A Switching Regulator xxx Series Regulated Single Outputs from 3.3V to 15VDC Wide Input Range to 28V SIP3 Package Non Isolated High Efficiency to 94% Class B Conducted & Radiated Emissions Short Circuit Protection Low Standby Input Current -40C to +85C Operation MTBF >4.0MHrs Dimensions: 3 Year Warranty TR05: The TR05 provides a compact efficient switching regulator solution operating from a wide range 0.46 x 0.29 x 0.38 (11.68 x 7.5 x 9.65mm) DC input. Output voltages start from 3.3V and the TR05 features short circuit protection and an industrial operating temperature range. Models & Ratings Input Current Maximum Efficiency Vin Efficiency Vin Input Voltage Output Voltage Output Current Capacitive Load (Min) with (Max) with full Model Number Full Load Vin Full Load Vin No Load F full load load (Min) (Max) 4.5 - 28V 3.3V 0.5A 1.0mA 412mA 79mA 100 89 75 TR05S3V3 7 - 28V 5.0V 0.5A 1.0mA 388mA 112mA 100 92 80 TR05S05 14 - 28V 12.0V 0.5A 1.5mA 456mA 238mA 100 94 90 TR05S12 17 - 28V 15.0V 0.5A 2.0mA 469mA 292mA 47 94 92 TR05S15 Notes 1. Standard tube quantity 30 pcs Mechanical Details 0.29 0.46 (7.5) 0.18 (4.46) 0.02 (0.50) (11.68) Printed Pin Connections Face 12 3 Pin Single 0.38 0.16 0.40 0.29 TR05 0.08 1 +Vin (9.65) (4.10) (10.15) (7.50) 0.01 (2.00) 2 Ground (0.25) 3 +Vout 0.02 0.02 (0.50) 12 3 (0.50) 0.10 (2.54) 0.20 (5.08) Notes 1. All dimensions are in inches (mm) 4. Pin pitch tolerance: 0.014 (0.35) 2. Weight: 0.004lbs (2.0g) approx. 5. Case & pin tolerance: 0.02 (0.5) 3. Pin diameter: 0.020.002 (0.50.05) www.xppower.com 1DC-DC Converter XPPower TR05 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 4.5 28 VDC See Models and Ratings table. Input Filter Integral capacitor Measured with 12H inductor and 10F capacitor Input Reflected Ripple 35 mA pk-pk source values. Input Surge 30 VDC for 100 ms Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 15 VDC See Models and Ratings table. Initial Set Accuracy 3.0 % At full load. Minimum Load 0 mA No minimum load required. Line Regulation 0.5 % Load Regulation +/-8.0 % From 0% to full load. Transient Response 3 % For 50% load change. Recovery in 250s. Ripple & Noise 60 mV pk-pk 20MHzbandwidth measured from 10% to 100% load Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C Startup Time 10 ms Nominal Vin with resistive load. Overload Protection 2 A General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 92 % See models and ratings table. Isolation: Input to Output 0 VDC Non isolated. Switching Frequency 570 kHz Mean Time Between Failure 4.0 MHrs MIL-HDBK-217F. Weight 0.0044 (2.0) lb (g) Case Material Non-conductive black plastic UL94V-0 Pin Material Solder coated C5191R-H Potting Material UL94V-0 rated, Epoxy Wave solder peak, 1.5mm from case 10s max. Soldering Temperature 260 C Not suitable for vapour phase soldering. For further details, contact XP Power applications team. Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +85 C See derating curves. Storage Temperature -55 +125 C Case Temperature +85 C Humidity 95 %RH Non-condensing. Cooling Natural convection Safety Approvals Agency Standard Test Level Notes & Conditions CE Meets all applicable directives UKCA Meets all applicable legislation www.xppower.com 2