AC-DC Power Supplies VER05 Series 5 Watt Energy Efficiency Level VI xxx Series Barrel Jack & USB Versions Interchangeable Mains Connectors Included Universal Input Output Voltages from 5.0 V to 12.0 V Class II Construction Low Cost BRAND Dimensions: The VER05 series of wall plug adaptors comply with the very latest energy efficiency VI standards VER (body only): with high active mode efficiency and extremely low no load power consumption. Available with 1.45 x 2.16 x 1.69(37.0 x 55.1x 42.9 mm) multiple USB options in addition to the standard jack plug connector these adaptors suit a wide variety of cost sensitive applications while maintaining industry leading performance. Models & Ratings (2) Output Power Output Voltage Output Current Total Regulation Efficiency Output Connector Model Number 5.0 V 1000 mA 5% 77% USB A in case VER05US050-BB 5.0 V 1000 mA 5% 74% Mini USB B VER05US050-MB 5.0 V 1000 mA 5% 74% Micro USB B VER05US050-UB 5 W 5.0 V 1000 mA 5% 75% 5.5 x 2.1 x 12 mm DC Jack VER05US050-JA (4) 6.0 V 830 mA 5% 76% 5.5 x 2.1 x 12 mm DC Jack VER05US060-JA 9.0 V 550 mA 5% 78% 5.5 x 2.1 x 12 mm DC Jack VER05US090-JA 12.0 V 420 mA 5% 79% 5.5 x 2.1 x 12 mm DC Jack VER05US120-JA Notes 1. Other output voltages available, contact sales for details. 3. Typical average of efficiencies measured at 25%, 50%, 75% and 100% load 2. Total regulation includes initial set accuracy, line and load regulation. and 115 VAC input. 4. Level V Energy Efficiency. Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage 90 264 VAC Input Frequency 47 63 Hz Input Current 0.18 A 100 VAC Inrush Current 60 A 240 VAC, cold start at 25 C Power Factor EN61000-3-2, class A No Load Input Power <0.1 W Input Protection Internal T1.0A/250 VAC fuse Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5.0 12.0 V See Models and Ratings table Minimum Load 0 A No minimum load required Start Up Delay 4 s Start Up Rise Time 50 ms Hold Up Time 8 ms Full load and 100 VAC Total Regulation 5 % See Models and Ratings table Recovery within <1% within 500 s for a 50% step load Transient Response 4 % deviation change at 0.2 A/s Ripple & Noise 200 mV pk-pk 20 MHz bandwidth Short Circuit Protection Continuous, trip and restart (hiccup mode) with auto recovery Temperature Coefficient 0.05 %/ C www.xppower.com 1AC-DC Power Supplies VER05 Series General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 74 79 % See Models and Ratings table Energy Efficiency Level VI Isolation 3000 VAC Input to Output Switching Frequency 24 70 kHz Variable Mean Time Between Failure 100 kHrs MIL-HDBK-217F at 25 C GB Weight 0.28 (80) lb (g) Body only Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature 0 +60 C Derate from 100% load at 40 C to 50% load at 60 C Storage Temperature -40 +85 C Operating Humidity 5 95 % RH, non-condensing Cooling Natural convection Shock 1 m drop onto concrete on each of 6 axes Vibration 10 300 Hz 2 g 15 mins/sweep, 30 mins for each of 3 axes EMC: Emissions Phenomenon Standard Test Level Notes & Conditions EN55032 Emissions Level B Conducted & Radiated FCC Part 15, Subpart B Harmonics Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions ESD Immunity EN61000-4-2 2,3 B 4 kV contact, 8 kV air Radiated Immunity EN61000-4-3 3 V/m A EFT/Burst EN61000-4-4 Level 2 B Surges EN61000-4-5 Level 2 A Conducted Immunity EN61000-4-6 3 V A Magnetic Fields EN61000-4-8 1 A/m A Dips and Interruptions EN55024 100% 10 ms, 30% 500 ms, 100% 5000 ms, Perf Criteria A, A, B Safety Approvals Phenomenon Standard CB Report IEC60950-1, IEC62368-1 UL UL/cUL60950-1, approved as limited power source (LPS) TUV EN60950-1, EN62368-1 CCC China Compulsory Certification, GB4943 AU/NZ AU/NZ 60950.1 Mechanical Details VER05US05-BB 0.10 1.69 (2.71) (42.9) 0.03 (1.00) 0.02 (0.60) 1.45 (37.0) 2.16 (55.10) www.xppower.com 2