BLUE 77C 17M 0Y 24K Wickgun Braid Dispensers Help take the work out of rework. Wickgun desoldering braid dispensers combine the capabilities of desoldering braid with the convenience of a hand tool. Simple one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes. The only other tool you need is your soldering iron. Wickgun braid dispensers t comfortably in your hand rotate the thumb wheel to advance or retract the braid, squeeze the The desoldering system that trigger to cut off used braid. There are no ts in the palm of your hand. plungers to push, spring-loaded levers to cock or vacuum chambers to empty. You The simple, one-handed-operation of the XURON Wickgun eliminates the tool- never touch the braid. You dont burn your swapping three-hands-required process associated with conventional desoldering ngers. You stay clean and solderability braid use. Your technicians work quickly and precisely with just a Wickgun is enhanced since the desoldering braid and their soldering iron. Productivity is enhanced. In tests performed by XURON, is not contaminated by nger oil or other technicians worked 3 to 5 times faster than with conventional desoldering braid on foreign matter. bobbinsa signicant increase in productivity At this rate a Wickgun pays for itself before lunch on its rst day of use. And the increased productivity fully offsets Wickgun braid dispensers feature your costs for replacement cassettes, easily contributing 20,000 to 40,000 per replaceable/interchangeable cassettes, year to your company in increased productivity. factory loaded with 15 foot (4.6 meter) lengths of pure copper braid impregnated Wickgun use can signicantly reduce the user cost for your desoldering braid. with water clear ux. Cassettes are Due to the inherently clumsy and time consuming nature of conventional braid use, available in braid sizes 1, 2, 3 and 4 a 30-50% waste factor is not uncommon. Additionally, braid is commonly discarded (widths - 0.035, 0.060, 0.076 and 0.110). when its temperature becomes too high for the technicians comfort and safety. Both the Wickgun and its replacement Wickgun use can eliminate these hidden desoldering braid costs. With all this cassettes are manufactured from static in mind, when deciding how many Wickguns you should purchase, ask yourself, dissipative plastic so they may be used How much money do I want to save in conjunction with your electrostatic discharge (ESD) control program. precisiontoolsIncrease productivity & reduce cost To see how the WickGun Desoldering Braid Dispensers can help you increase productivity and reduce cost, contact your Using a WickGun local Xuron Sales Representative or Distributor to arrange for braid dispenser is a demonstration. 3-5 times faster than conventional braid use. Dispense, position Part Number Description and cut braid with one 1000-1 Dispenser with 1 (0.035) braid tool (in one hand). 1000-2 Dispenser with 2 (0.060) braid No wasted braid. 1000-3 Dispenser with 3 (0.076) braid Braid can be retracted 1000-4 Dispenser with 4 (0.110) braid and cut exactly at the point where solder ends. W4015-1 Replacement Cassette - 1 braid No waste associated W4015-2 Replacement Cassette - 2 braid with heat transfer W4015-3 Replacement Cassette - 3 braid (burned fingers). W4015-4 Replacement Cassette - 4 braid No braid contamination. Solderability is enhanced because braid is not BLUE 77C 17M contaminated with finger 0Y 24K oil or other foreign matter. US & Canadian Sales/Main Office International Sales Office Xuron Corp. Zed Group 62 Industrial Park Road PO Box 505671 Saco, ME 04072 Chelsea, MA 02150 Tel: 207-283-1401 Tel: 617-889-2220 Fax: 207-283-0594 Fax: 617-889-0170 Email: sales xuron.com Email: international.sales verizon.net www.xuron.com precisiontools