DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 (Pb Free) 5%, 1% Product specification Aug 19, 2004 V.2 Supersedes Date of Mar. 06, 2003 Product specification 2 10 RC SERIES 0603 (Pb Free) Chip Resistor Surface Mount SCOPE This specification describes RC0603 series chip resistors with lead-free terminations made by thick film process. ORDERING INFORMATION Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. PHYCOMP ORDERING CODE PHYCOMP ORDERING CODE 12NC CODE CTC CODE 2322 / 2350 XXX XXXXX L RC0603 X X X XX XXXX L (1) (2) (3) (4) (5) (6) (1) (2) (3) (4) (2) ( ) 1 TOLERANCE PAPER / PE TAPE ON REEL (units) TYPE/ START TOL. RESISTANCE (1) 0603 IN (%) RANGE 5,000 10,000/not preferred 20,000 F = 1% J = 5% RC21 2322 5% 1 to 10 M 702 60xxx 702 70xxx 702 81xxx RC22 2322 1% 1 to 10 M 704 6xxxx 704 7xxxx 704 8xxxx ( ) 2 PACKAGING TYPE HRC21 2350 5% 11 to 22 M 522 10xxx - - R = Paper/PE taping reel Jumper 2322 - 0 702 96001 702 97001 702 92002 ( ) 3 TEMPERATURE COEFFICIENT OF RESISTANCE (1) The resistors have a 12-digit Last digit of 12NC = Base on spec (3) ordering code starting with Resistance decade Last digit 2322. ( ) 4 TAPING REEL X 0.01 to 0.0976 0 (2) The subsequent 4 or 5 digits 07 = 7 inch dia. Reel 0.1 to 0.976 X 7 indicate the resistor 10 = 10 inch dia. Reel (not preferred) X 1 to 9.76 8 tolerance and packaging. 13 = 13 inch dia. Reel 10 to 97.6 X 9 (3) The remaining 4 or 3 digits ( ) 5 RESISTANCE VALUE X 100 to 976 1 represent the resistance value 5R6, 56R, 560R, 5K6, 56K, 22M with the last digit indicating X 1 to 9.76 k 2 the multiplier as shown in the 10 to 97.6 kX 3 (6) RESISTOR TERMINATIONS table of Last digit of 12NC. X 100 to 976 k 4 L = Lead free terminations (pure Tin) (4) L means lead-free 1 to 9.76 MX 5 terminations. X 10 to 97.6 M 6 ORDERING EXAMPLE ORDERING EXAMPLE Example: 0.02 X = 0200 or 200 The ordering code of a RC0603 The ordering code of a RC22 0.3 X = 3007 or 307 chip resistor, value 56 X with resistor, value 56 X with 1% 1 X 1% tolerance, supplied in 7-inch = 1008 or 108 tolerance, supplied in tape of tape reel is: RC0603FR-0756RL. 33 kX 5,000 units per reel is: = 3303 or 333 232270465609L. 10 MX = 1006 or 106 NOTE 1. The L at the end of the code is only for ordering. On the reel label, the standard CTC or 12NC will be mentioned an additional stamp LFP= lead free production. 2. Products with lead in terminations fulfil the same requirements as mentioned in this datasheet. 3. Products with lead in terminations will be phased out in the coming months (before July 1st, 2006) www.yageo.com Aug 19, 2004 V.2